Defy Appliances DFD442 3Installation, Before operating your refrigerator, Electrical connection

Models: DFD442

1 28
Download 28 pages 44.31 Kb
Page 8
Image 8
3Installation

3Installation

Please remember that the manufacturer shall not be held liable if the information given in the instruction manual is not followed.

Points to be considered when re- transporting your refrigerator

1.Your refrigerator must be emptied and cleaned prior to any transportation.

2.The shelves, accessories, crisper etc.

In your refrigerator must be fastened securely with adhesive tape to protect against any jolts before repackaging

3.Packaging must be tied with thick tape and strong rope and the transportation guidelines printed on the package must be followed.

 Before operating your refrigerator Before operating your refrigerator

Before using your refrigerator please check the following:

1.Is the interior of the refrigerator dry and can the air circulate freely at the rear of it?

2.The 2 plastic wedges can be fitted as illustrated in the figure below. The plastic wedges will provide the required distance between your refrigerator and the wall in order to allow for free air circulation. (The illustrated figure is an example only and may not match your refrigerator exactly).

3.Clean the interior of the refrigerator as recommended in the “Maintenance and cleaning” section.

4.Plug the refrigerator into the wall socket. When the fridge door is open the fridge compartment interior light will come on.

5.You may hear a noise as the compressor starts up. The liquid and gases sealed within the refrigeration system may also give rise to noise, even if the compressor is not running, this is quite normal.

6.The front edges of the refrigerator may feel warm. This is normal. These areas are designed to be warm to avoid condensation.

 Electrical connection Electrical connection

Connect your refrigerator to a grounded socket which is protected by a fuse with the appropriate capacity.

Important

The connection must be in compliance with national regulations.

The power cable plug must be easily accessible after installation.

The specified voltage must be equal to your mains voltage.

Extension cables and multiway plugs must not be used for connection.

A damaged power cable must be replaced by a qualified electrician.

A damaged refrigerator must not be operated before it is repaired! There is danger of an electric shock!

PAGE 8

Page 8
Image 8
Defy Appliances DFD442 instruction manual 3Installation, Before operating your refrigerator, Electrical connection