PAGE 10 OF16
Condition Action Notes and comments
Requires routine cleaning Mild detergent solution applied
with soft sponge or cloth. Rinse
and wipe dry.
If possible use warm to hand-
hot water. A 5% addition of
ammonia is beneficial.
Finger prints Pre-treat finger marks with al-
cohol or an organic solvent.
Follow immediately with rou-
tine cleaning.
Minimize re-occurrence by ap-
plying a wax or silicone based
household polish to the clean
dry surface.
Wipe with a little baby oil and
a soft lint free cloth.
Buff to shine.
Apply whenever necessary.
Stubborn stains and
discolouration
Use a little Ceran cleaning
paste. (available from Defy
Service Centres)
Rinse and dry.
Repeat several times rather
than resorting to a single
aggressive cleaning method.
Grease and fat splatter. Wipe off excess with a soft
cloth or paper towel. Use a wa-
ter borne degreasing agent
( dishwashing liquid ).Follow
up by routine cleaning.
Scratches on the brushed fin-
ish.
For slight scratches, use a ny-
lon pad loaded with an iron
free abrasive polishing com-
pound. Follow the direction of
the original texture. Follow up
with routine cleaning.
For deep scratches use a
coarser abrasive initially and
follow up as for light scratches.
Deep scratches will be difficult
to remove completely. Do not
use steel wool or metal scour-
ers unless they are made from
stainless steel.
It must be appreciated that some of the above suggested procedures w ill
alter the surface appearance of the treated area.
They should therefore only be applied with due consideration and car e.