Delfield
The
Caster Mounting Detail
A universal bolt hole pattern, Figure 3, is provided on the bottom of the cabinet. It will accommodate any caster. Simply line up the plate holes with the corresponding cabinet holes.
Figure 2. 5-15P Connector
Refer to the amperage data list in SPECIFICATIONS, the serial tag, your local code or the National Electrical Code to be sure the cabinet is connected to the proper power source. A protected circuit of the correct voltage and amperage must be run for connection of the line cord, or permanent connection to the cabinet.
CAUTION
The thermostat must be turned to OFF and the cabinet disconnected from the power source whenever per- forming service, maintenance functions or cleaning the refrigerated area.
2.82"2.14"
If hole pattern on caster/leg | If hole pattern on caster/leg |
matches the one above, | matches the one above, |
mount in middle set of holes. | mount in inner set of holes. |
3" Caster - 3234024 | 2" Caster - 3234148 |
5" Caster - 3234161 |
|
Figure 3. Universal Caster Mounting Pattern
Note: For undercounter units, 2" casters will be mounted into a recessed box.
10