Delfield 4460N-24M manual Models, 4460N MEGA TOP, Mega Top Refrigerators, Self-Contained Compact

4460N MEGA TOP

Front-Breathing Self-Contained Compact Mega Top Refrigerators

Project_ __________________________

Item_____________________________

Quantity_ _________________________

CSI Section 11400

4460N

MODELS:

 4460N-12M	Two section with doors	 D4460N-12M	Two section with drawers
	Twelve pan capacity		Twelve pan capacity
 4460N-18M	Two section with doors	 D4460N-18M	Two section with drawers
	Eighteen pan capacity		Eighteen pan capacity
 4460N-24M	Two section with doors	 D4460N-24M	Two section with drawers
	Twenty-four pan capacity		Twenty-four pan capacity

FRONT-BREATHING

STANDARD FEATURES

•Patented air screen ensures product stays cold without drying it out

•All 4400 Series units are 100% front breathing, which allows the unit to be pushed against a wall or built into a cabinet or an existing line up

•Durable, rugged stainless steel sides, top and front

•Features Delfield’s exclusive ABS interior (on sides). ABS is extremely durable - it won’t dent, chip or corrode and is backed by a limited lifetime warranty

•Delfield supplies 1/6 size pans and adapter bars for top opening

•Mega top refrigerators are standard with 8” wide, dishwasher safe polyethylene cutting board treated with anitmicrobial agent

•“D” prefix models feature Delfield’s new drawer system. Drawers are backed by a 10-year warranty on the track assembly

•Environmentally friendly R404A refrigerant

•High density foamed in place polyurethane keeps energy costs low

•Black recessed quick grip handle

	• Standard on 2” casters for easy cleaning and installation
Model 4460N-24M
	• 7’ cord and plug supplied
	• One epoxy coated wire shelf standard, installed per door section
	• ACT solid state electronic control
	• One year parts and 90 day labor standard warranty.

OPTIONS AND ACCESSORIES

Flat lift off cover

18” wide single tier overshelf

Stainless steel finish on back

Plastic laminate on front

Additional wire shelves

Door lock

Exterior thermometer

Glass door(s)

*220V/50 Hertz electrical system

*Inclusion of this option will alter electrical specifications of the unit.

SELF-CONTAINED COMPACT

SPECIFICATIONS

Exterior top is one-piece 22-gauge stainless steel with integral 2.12” (5.1cm) square nosing on the front. Telescoping lid is constructed of 20-gauge stainless steel. Top opening can accept 12, 18 or 24 1/6 size plastic pans 4”-6” (10.1cm-15.2cm) deep. Adapter bars and 1/6 size pans are supplied by Delfield. Temperature in top openings maintains 33°F (1°C) to 41°F (5°C), with pans recessed 2.5” (6.4cm) at 86°F ambient room tempera- ture, meeting NSF 7 requirements. One 60” x 8” x .5”

(152.4cm x 20.3cm x 1.3cm) polyethylene cutting board treated with antimicrobial agent is mounted on the top at the front edge.

Exterior back and bottom are two-piece24-gauge galvanized steel. Exterior ends are stainless steel.

Interior sides are thermoformed ABS plastic with shelf supports. Base is fully insulated with high-density foamed in place polyurethane.

Refrigeration system uses HFC-404A refrigerant. Compressor is 1/2 H.P., with condenser coil and hot gas condensate evaporator mounted on rear of the cabinet. Evaporator coils and temperature control are located on the interior rear wall of the cabinet. Refrigerant flow is controlled by a capillary tube. Cabinet maintains an interior cabinet temperature of 36°F to 40°F (2°C to 4°C).

ACT control. ACT electronic, solid state control, mounted on the exterior rear of the cabinet, allows unit to maintain precise temperatures in heavy duty conditions.

Electrical connections are 115 volt, 60 Hertz, single phase. Unit has a 7’ (2.1m) long electrical cord and NEMA 5-15P plug.

Casters: Equipment is mounted on 2” (5.08cm) diameter plate casters with front two locking. Equipment clearance above the floor is 2.5” (6.35cm).

Doors have a 24-gauge stainless steel exterior, with thermoformed ABS plastic interior liner. Cabinet has one adjustable epoxy-coated wire shelf per door opening.

Drawers have 24-gauge stainless steel exterior with thermoformed ABS plastic interior liner. Drawer frames are 12-gauge stainless steel. Drawer slides are 11-gauge stainless steel with Delrin bearings. Each top drawer holds one 12” x 20” (30.5cm x 50.8cm) pan, three 1/9 size and three 1/6 size 4”-6” (10.2cm- 15.2cm) deep pans. Each bottom drawer holds one 12” x 20” (30.5cm x 50.8cm) pan, three 1/9 size and three 1/6 size 4” (10.2cm) deep pans. Pans are supplied by others.

MEGA TOP REFRIGERATORS

980 S. Isabella Road	Phone: 800-733-8948	Approval__________________
Mt. Pleasant, MI 48858	Fax: 800-669-0619	Date_____________________
www.delfield.com	Email: info@delfield.com