Delfield specifications 4464N FLAT TOP, Front-Breathing Flat Top Refrigerated Base, D4464N

4464N FLAT TOP

Front-Breathing Flat Top Refrigerated Base

Project __________________________

Item ____________________________

Quantity _________________________

CSI Section 11400

MODELS:

❑ 4464N	Two section refrigerator	❑ D4464N	Two section refrigerator
	with doors		with drawers

Model 4464N

STANDARD FEATURES

•All 4400 and 4500 Series units are 100% front breathing, which allows the unit to be pushed against a wall or built into a cabinet or an existing line up

•Durable, rugged stainless steel sides, top and front

•Features Delfield’s exclusive ABS interior (on sides). ABS is extremely durable - it won’t dent, chip or corrode and is backed by a limited lifetime warranty

•Heavy duty self-closing hinges

•“D” prefix models feature Delfield’s exclusive new drawer system. Drawers are backed by a 10-year warranty on the track assembly

•Environmentally friendly R404A refrigerant

•High density foamed in place polyurethane keeps energy costs low

•Black recessed quick grip handle

•Standard on 2” casters for easy cleaning and installation

•60-cycle single phase electrical system

•7’ cord and plug supplied

•Cord spring relief - prevents cord rollover

•One epoxy coated wire shelf standard, installed per door section

•ACT solid state electronic control

•One year parts and 90 day labor standard warranty.

OPTIONS AND ACCESSORIES

❑Flat lift off cover

❑18” wide single tier overshelf

❑Stainless steel finish on back

❑Plastic laminate on front

❑Additional wire shelves

❑Door lock

❑Exterior thermometer

❑Interior lights

❑Glass door(s)

❑*220V/50 Hertz electrical system

*Inclusion of this option will alter electrical specifications of the unit.

4464N FRONT-BREATHING FLAT TOP

SPECIFICATIONS

Exterior top is one-piece,22-gauge stainless steel with integral square nosing on the front.

Exterior back and bottom are two-piece24-gauge galvanized steel.

Exterior ends are stainless steel.

Interior sides are thermoformed ABS plastic with shelves supported on plugs. Interior back is one- piece 22-gauge stainless steel. Interior bottoms are thermofoamed ABS plastic. Base is fully insulated with high-density foamed in place polyurethane.

Refrigeration system uses HFC-404A refrigerant. Compressor is 1/5 H.P., with condenser coil and hot

gas condensate evaporator mounted on rear of the cabinet. Evaporator coils are located on the interior rear wall of the cabinet. Refrigerant flow is controlled by a capillary tube. Cabinet maintains an interior cabinet temperature of 36°F to 40°F (2°C to 4°C).

ACT control. ACT electronic, solid state control, mounted on the exterior rear of the cabinet, allows unit to maintain precise temperatures in heavy duty conditions.

Electrical connection is 115 volt, 60 Hertz, single phase. Unit has a 7’ (2.1m) long electrical cord and NEMA 5-15P plug.

Casters Equipment is mounted on 2” (5.08cm) (2.5” ride height), diameter plate casters with front two locking.

Door has a 24-gauge stainless steel exterior, with thermoformed ABS plastic interior liner.

Drawers have 24-gauge stainless steel exterior with thermoformed ABS plastic interior liner. Drawer frames are 12-gauge stainless steel. Drawer slides are 11- gauge stainless steel with Delrin bearings. Top drawer holds one full size 12” x 20”, 4”-6" (30.5cm x 50.8cm x 10.2cm) deep pan, and three 1/6 size pans. Bottom drawer holds one full size 12 x 20" and three 1/6 size 4" deep pans. Pans are supplied by others.

REFRIGERATED BASE

980 S. Isabella Road	Phone: 800-733-8948	Approval _________________
Mt. Pleasant, MI 48858	Fax: 800-669-0619	Date____________________
www.delfield.com	Email: info@delfield.com