Delfield 4532N specifications Models, Standard Features, Options Accessories, Specifications

Delfield
™	®	Project ___________________________________
		Item _____________________________________
		Quantity _ ________________________________
4532N Flat Top		CSI Section 11400
		Approved _ _______________________________
		Date _____________________________________
Front-Breathing Flat Top Freezer Base

Models

•4532N Single section freezer with doors

•D4532N Single section freezer with drawers

4532N Flat Top

4532N

Standard Features

•100% front breathing, which allows the unit to be pushed against a wall or built into a cabinet or an existing line up

•Durable, rugged stainless steel sides, top and front

•Features Delfield’s exclusive ABS interior (on sides). ABS is extremely durable - it won’t dent, chip or corrode and is backed by a limited lifetime warranty

•Heavy duty self-closing hinges

•“D” prefix models feature Delfield’s exclusive new drawer system. Drawers are backed by a 10-year warranty on the track assembly

•Environmentally friendly R404A refrigerant

•High density foamed in place environmentally friendly, Kyoto Protocol Compliant, Non ODP (Ozone Depletion Potential), Non GWP (Global Warming Potential) polyurethane keeps energy costs low

•Black recessed quick grip handle

•Standard on 2” casters for easy cleaning and installation

•60-cycle single phase electrical system

•7’ cord and plug supplied

•Cord spring relief - prevents cord rollover

•One epoxy coated wire shelf standard, installed per door section

•ACT solid state electronic control

•One year parts and 90 day labor standard warranty.

Options &

Accessories

•Flat lift off cover

•18” wide single tier overshelf

•Stainless steel finish on back

•Plastic laminate on front

•Additional wire shelves

•Door lock

•Exterior thermometer

•Interior lights

•Glass door(s)

•*220V/50Hertzelectricalsystem *Inclusion of this option will alter electrical specifications of the unit.

Front-Breathing Flat Top Freezer Base

Specifications

Exterior top is one-piece, 22-gauge stainless steel with integral square nosing on the front.

Exterior back and bottom are two-piece 24-gauge galvanized steel.

Exterior ends are stainless steel.

Interior sides are thermoformed ABS plastic with shelves supported on plugs. Interior back is one-piece 22-gauge stainless steel. Interior bottoms are thermofoamed ABS plastic. Base is fully insulated with high-density foamed in place environmentally friendly, Kyoto Protocol Compliant, Non ODP (Ozone Depletion Potential), Non GWP (Global Warming Potential) polyurethane.

Refrigeration system uses HFC-404A refrigerant. Compressor is 1/5 H.P., with condenser coil and hot gas condensate evaporator mounted on rear of the cabinet. Evaporator coils are located on the interior rear wall of the cabinet. Refrigerant

flow is controlled by a capillary tube. Cabinet maintains an interior cabinet temperature of 0°F to 10°F (-18°C to -12°C).

Electrical connection is 115 volt, 60 Hertz, single phase. Unit has a 7’ (2.1m) long electrical cord and NEMA 5-15P plug.

Casters Equipment is mounted on 2” (5.08cm) (2.5” ride height), diameter plate casters with front two locking.

Door has a 24-gauge stainless steel exterior, with thermoformed ABS plastic interior liner.

Drawers have 24-gauge stainless steel exterior with thermoformed ABS plastic interior liner. Drawer frames are 12-gauge stainless steel. Drawer slides are 11-gauge stainless steel with Delrin bearings. Top drawer holds two full size 12” x 20”, 4”-6" (30.5cm x 50.8cm x 10.2cm) deep pans. Bottom drawer holds one full size 12 x 20" and three 1/6 size 4" deep pans. Pans are supplied by others.

980 S. Isabella Rd.	Phone: 800-733-8948 or 989-773-7981	www.delfield.com
Mt. Pleasant, Michigan 48858
	Fax: 800-669-0619