Delfield D4427N-9M specifications Standard Features, Options and Accessories

4427N MEGA TOP

Front-Breathing Self-Contained Compact Mega Top Refrigerators

Project_ __________________________

Item_____________________________

Quantity_ _________________________

CSI Section 11400

MODELS:

 4427N-9M	Single section with doors	 D4427N-9M	Single section with drawers
	Nine pan capacity	_	Nine pan capacity

4427N FRONT-

STANDARD FEATURES

• Patented air screen ensures product stays cold without drying it out

• All 4400 Series units are 100% front breathing, which allows the unit to be pushed against a wall or built into a cabinet or an existing line up

• Durable, rugged stainless steel sides, top and front

• Features Delfield’s exclusive ABS interior (on sides). ABS is

	extremely durable - it won’t dent, chip or corrode and is backed by
	a limited lifetime warranty
	• Delfield supplies 1/6 size pans and adapter bars for top opening
	• Mega top refrigerators are standard with 8” wide, dishwasher safe
	polyethylene cutting board treated with anitmicrobial agent
	• “D” prefix models feature Delfield’s new drawer system. Drawers
	are backed by a 10-year warranty on the track assembly
	• Environmentally friendly R404A refrigerant
	• High density foamed in place polyurethane keeps energy costs low
Model 4427N-9M	• Black recessed quick grip handle
	• Standard on 2” casters for easy cleaning and installation
	• 7’ cord and plug supplied
	• Cord spring relief - prevents cord rollover
	• One epoxy coated wire shelf standard, installed per door section
	• ACT solid state electronic control
	• One year parts and 90 day labor standard warranty.

OPTIONS AND ACCESSORIES

Flat lift off cover

18” wide single tier overshelf

Stainless steel finish on back

Plastic laminate on front

Additional wire shelves

Door lock

Exterior thermometer

Glass door(s)

*220V/50 Hertz electrical system

*Inclusion of this option will alter electrical specifications of the unit.

BREATHING SELF-CONTAINED MEGA

SPECIFICATIONS

Exterior top is one-piece, 22-gauge stainless steel with integral 2.12” (5.1cm) square nosing on the front. Top of drawer unit has one opening to accept six 1/6-size 4” deep pans or one 12” x 20” full size pan and three 1/6-size 4” deep pans. Top of door unit has one opening to accept six 1/6-size 4-6” deep pans or one 12” x 20” full size pan and three 1/6-size 4” deep pans. Adapter bars and 1/6 size pans are supplied by Delfield. Lid is constructed of 20-gauge stainless steel. Temperature

in top opening to maintain 33°F (1°C) to 41°F (5°C), with pans recessed 2.5” (6.4cm) at 86°F ambient room temperature, meeting NSF 7 requirements. One 27” x 8” x .5” (68.6cm x 20.3cm x 1.3cm) polyethylene cutting board treated with antimicrobial agent is mounted on the top at the front edge.

Exterior back and bottom are two-piece24-gauge galvanized steel. Exterior ends are stainless steel.

Interior sides are thermoformed ABS plastic with integral shelf supports. Base is fully insulated with high-density foamed in place polyurethane.

Refrigeration system uses HFC-404A refrigerant. Compressor is 1/5 H.P., with condenser coil and hot gas condensate evaporator mounted on rear of the cabinet. Evaporator coils and temperature control are located on the interior rear wall of the cabinet. Refrigerant flow is controlled by a capillary tube. Cabinet maintains an interior cabinet temperature of 36°F to 40°F (2°C to 4°C).

ACT control. ACT electronic, solid state control, mounted on the exterior rear of the cabinet, allows unit to maintain precise temperatures in heavy duty conditions.

Electrical connection is 115 volt, 60 Hertz, single phase. Unit has a 7’ (2.1m) long electrical cord and NEMA 5-15P plug.

Casters: Equipment is mounted on 2” (5.08cm) diameter plate casters with front two locking. Equipment clearance above the floor is 2.5” (6.35cm).

Doors have a 22-gauge stainless steel exterior, with thermoformed ABS plastic interior liner. Cabinet has one adjustable epoxy-coated wire shelf.

Drawers have 22-gauge stainless steel exterior with thermoformed ABS plastic interior liner. Drawer frames are 12-gauge stainless steel. Drawer slides are 11- gauge stainless steel with Delrin bearings. Top drawer holds one full size 12” x 20”, 4”-6" (30.5cm x 50.8cm x 10.2cm) deep pan, and three 1/6 size pans. Bottom drawer holds one full size 12 x 20" and three 1/6 size 4" deep pans. Pans are supplied by others.

TOP REFRIGERATORS

980 S. Isabella Road	Phone: 800-733-8948	Approval__________________
Mt. Pleasant, MI 48858	Fax: 800-669-0619	Date_____________________
www.delfield.com	Email: info@delfield.com