Delfield D4472N-18, D4472N-12 specifications 4472N Salad Top

Delfield™®

4472N Salad Top

Front-Breathing Self-Contained Compact Salad Top Refrigerators

Project ___________________________________

Item _____________________________________

Quantity _ ________________________________

CSI Section 11400

Approved _ _______________________________

Date _____________________________________

4472N

Models

•4472N-12 Two section with doors twelve pan capacity

•D4472N-12 Two section with drawers twelve pan capacity

•4472N-18 Two section with doors eighteen pan capacity

•D4472N-18 Two section with drawers eighteen pan capacity

Salad

4472N-18

Standard Features

•Patented air screen ensures product stays cold without drying it out

•All 4400 Series units are 100% front breathing, which allows the unit to be pushed against a wall or built into a cabinet or an existing line up

•Durable, rugged stainless steel sides, top and front

•Features Delfield’s exclusive ABS interior (on sides). ABS is extremely durable - it won’t dent, chip or corrode and is backed by a limited lifetime warranty

•Delfield supplies 1/6 size pans and adapter bars for top opening

•Salad top refrigerators are standard with 10” wide, dishwasher safe polyethylene cutting board treated with anitmicrobial agent

•“D” prefix models feature Delfield’s new drawer system. Drawers are backed by a 10-year warranty on the track assembly

•Environmentally friendly R404A refrigerant

•High density foamed in place environmentally friendly, Kyoto Protocol Compliant, Non ODP (Ozone Depletion Potential), Non GWP (Global Warming Potential) polyurethane keeps energy costs low

•Black recessed quick grip handle

•Standard on 2” casters for easy cleaning and installation

•7’ cord and plug supplied

•One epoxy coated wire shelf standard, installed per door section

•ACT solid state electronic control

•One year parts and 90 day labor standard warranty.

Options &

Accessories

•Flat lift off cover

•18” wide single tier overshelf

•Stainless steel finish on back

•Plastic laminate on front

•Additional wire shelves

•Door lock

•Exterior thermometer

•Glass door(s)

•*220V/50Hertzelectricalsystem *Inclusion of this option will alter electrical specifications of the unit.

Top Front-Breathing Self-Contained

Specifications

Exterior top is one-piece 22-gauge stainless steel with integral 2.12” (5.1cm) square nosing at the front. Top has openings to accept 12 or 18 1/6-size 4”- 6” (10.2cm - 15.2cm) deep plastic pans. Adapter bars and 1/6 pans are supplied by Delfield. Temperature in top opening to maintain 33°F (1°C) to 41°F (5°C), with pans recessed 2.5” (6.4cm) at 86°F ambient room temperature, meeting NSF 7 requirements. One 72” x 10” x .5” (183cm x 25.4cm x 1.3cm) polyethylene cutting board treated with antimicrobial agent is mounted on the top at the front edge.

Exterior back and bottom are two-piece 24-gauge galvanized steel. Exterior ends are stainless steel.

Interior sides are thermoformed ABS plastic with shelf supports. Base is fully insulated with high-density foamed in place environmentally friendly, Kyoto Protocol Compliant, Non ODP (Ozone Depletion Potential), Non GWP (Global Warming Potential) polyurethane.

Refrigeration system uses HFC-404A refrigerant. Compressor is 1/2 H.P., with condenser coil and condensate evaporator mounted on rear of the cabinet. Evaporator coils are located on the interior rear wall of the cabinet. Refrigerant flow is controlled by a capillary tube. Cabinet maintains an interior cabinet temperature of 36°F to 40°F (2°C to 4°C).

ACT control. ACT electronic, solid state control, mounted on the exterior rear of the cabinet, allows unit to maintain precise temperatures in heavy duty conditions.

Electrical connections are 115 volt, 60 Hertz, single phase. Unit has a 7’ (2.1m) long electrical cord and NEMA 5-15P plug.

Casters: Equipment is mounted on 2” (5.08cm) diameter casters, with front three locking. Equipment clearance above the floor is 2.5” (6.35cm).

The following applies to three door models only. Doors have a 24-gauge

stainless steel exterior, with thermoformed ABS plastic interior liner. Cabinet has one adjustable epoxy-coated wire shelf per door opening.

The following applies to six drawer models only. Drawer fronts have a

24-gauge stainless steel exterior, with thermoformed ABS plastic interior liner. Drawer frames and slides are 12-gauge stainless steel. Drawer slides are 11-gauge stainless steel with Delrin bearings. Each section has two drawers. Each top drawer holds one full size 12” x 20” (30.5cm x 50.8cm) pan and three 1/9 size pans, 4” - 6” (10.2cm -15.2cm) deep. Each bottom drawer holds one 12” x 20” (30.5cm x 50.8cm) pan and three 1/9 size, 4” (10.2cm) deep pans. Pans supplied by others.

Compact Salad Top Refrigerators

980 S. Isabella Rd.

Mt. Pleasant, Michigan 48858

Phone: 800-733-8948 or 989-773-7981

Fax: 800-669-0619

www.delfield.com