![](/images/new-backgrounds/1082704/8270427x1.webp)
ColdPro Service and Installation Manual
STANDARD LABOR GUIDELINES TO REPAIR OR REPLACE PARTS ON DELFIELD EQUIPMENT
Advice and recommendations given by Delfield Service Technicians do not constitute or guarantee any special coverage.
•A maximum of
•A maximum of
•A maximum travel distance of 100 miles round trip and
•Overtime,
LABOR OF |
|
|
• Thermostat | • | Contactor/Relay |
• Door Jamb Switch | • Evaporator/Condenser Fan Motor and Blade | |
• | • Door Hinges, Locks, and Gaskets | |
• Fan Delay/Defrost Termination Switch | • | Condensate Element |
• Compressor Start Components and Overload Protector | • | Defrost Timer |
• Thermometer |
|
|
LABOR OF 2 HOURS TO REPLACE:
•Defrost Element
•Pressure Switch
•Locate/Repair Leak
LABOR OF 3 HOURS TO REPLACE:
•Capillary Tube
•Condenser or Evaporator Coil
LABOR OF 4 HOURS TO REPLACE
• Compressor
This includes recovery of refrigerant and leak check.
$35.00 maximum reimbursement for refrigerant recovery (includes recovery machine, pump, torch, oil, flux, minor fittings, solder, brazing rod, nitrogen, or similar fees.)
REFRIGERANTS
•R134A A maximum of $5.00/lb. or 31¢/oz. will be reimbursed.
•R404A A maximum of $12.00/lb. or 75¢/oz. will be reimbursed.
14 | For customer service, call (800) |