SPR-E
Refrigerator Module, 30” height, 30” depthProject __________________________
Item ____________________________
Quantity _________________________
CSI Section 11400
❑SPR-40E 40” length, refrigerator module, 30” height, 30” depth
❑SPR-50E 50” length, refrigerator module, 30” height, 30” depth
❑SPR-64E 64” length, refrigerator module, 30” height, 30” depth
Unit shown without standard lid locking device
134aREFRIGERANT
•14-gauge stainless steel top standard
•30” counter height, 30” depth
•9’ long cord and plug are supplied standard
•
•Electrical: 120 volt, 60 cycle, single phase
•R134A refrigerant
•Removable sliding lids (two per unit) standard
•Standard on 5” diameter polyurethane swivel casters
•Stainless steel fully retractable interlock provided as standard
•Basket rack system is standard
•A wide selection of laminate colors available at no additional charge
•Laminate selection has
•Meets NSF2, NSF7, UL and CEC standards
•
•Holds baskets size, 13.25” x 20.5” x 2.5” or 13.25” x 20.5” 4.75”
❑Single tier merchandiser (Unheated)
❑Double tier merchandiser (Unheated)
❑16”x30” stainless steel drop tray shelf
❑Cash shelf
❑Tray slides
•V-style
•Tubular bar
❑2” Wire basket (13.25”x20.5”x2.5”)
❑4” Wire basket (13.25”x20.5”x4.75”)
❑Decal package
❑Canopy
SPECIFICATIONS
Exterior: Exterior body is constructed of
Exterior top is constructed of
Interior: Refrigerated cold pan is 10” deep
steel access panel is located in bottom of tank, allowing complete access to the evaporator coil and fan package. On/Off switch is located on the operator side in a recessed panel with a hinged cover plate.
Refrigerated tank maintains NSF7 temperature requirements.
Lid: Lids are constructed of stainless steel and are foamed with polyurethane insulation. The lid thickness is 3/4”. Lid handle shall be black, recessed ABS. Lids are removable without the use of tools. Lid locks are standard.
Stainless steel lid locking bar is standard. Bar has locking handle at one end and mounts to clips, which are bolted to the top of the cabinet. The locking bar extends the length of the unit. Entire assembly can be removed during the serving period.
Electrical: Electrical connections shall be 120 volt, 60 Hertz, single phase. Unit shall have a 9’ long electrical cord and NEMA
operator right side of equipment. Double cord hook is located on the bottom of the unit.
Refrigeration: Refrigeration system uses R134A refrigerant and has a
Casters: Unit is mounted on 5” (12.7cm) diameter swivel polyurethane casters with
Styling: Units are standard with
30”HEIGHT, 30” DEPTH
980 S. Isabella Road | Phone: | Approval _________________ |
| |
Mt. Pleasant, MI 48858 | Fax: | Date____________________ | ||
www.delfield.com | Email: info@delfield.com | |||
|
| |||
|
|
|
|