Delfield SPRH-EW manual Specifications, 980 S. Isabella Road, Phone, Mt. Pleasant, MI, Fax, 134a

Project __________________________

Item ____________________________

Quantity _________________________

SPRH-EW CSI Section 11400

Refrigerator/Heated Combination Module, 30” height, 35” depth

MODELS

❑SPRH-68EW68” length, refrigerator/heated module, 30” height, 35” depth

SPRH-EW SHELLEYSPEED™

SPRH-68EW

134a

REFRIGERANT

STANDARD FEATURES

•14-gauge stainless steel top standard

•30” counter height, 35” depth

•9’ long cord and plug are supplied standard

•Two separate systems, one heated, one refrigerated

•18-gauge stainless steel exterior standard

•Electrical: 120 volt, 60 cycle, single phase

•R134A refrigerant

•Removable sliding lids (two per unit) standard

•Standard on 5” diameter polyurethane swivel casters

•Stainless steel fully retractable interlock provided as standard

•Basket rack system is standard

•A wide selection of laminate colors available at no additional charge

•Heated portion has stay cool surface, top is designed to stay below 90˚

•Laminate selection has 18-gauge galvanized base, 16-gauge coved corner supports to protect laminate

•Meets NSF2, NSF7, UL and CEC standards

•One-year parts and 90 day labor standard warranty. Additional warranties available

•Holds baskets size, 13.25” x 26.13” x 2.5” or 13.25” x 26.13” 4.75”

OPTIONS AND ACCESSORIES

❑Single tier merchandiser (Unheated)

❑Double tier merchandiser (Unheated)

❑16”x35” Stainless steel drop tray shelf

❑Stainless steel cash self

❑Tray slides

•V-style

•Tubular bar

❑2” Wire basket (13.25”x26.13”x2.5”)

❑4” Wire basket (13.25”x26.13”x4.75”)

❑Decal package

❑Canopy

REFRIGERATOR/HEATED

SPECIFICATIONS

Exterior: Exterior body is constructed of 18-gauge stainless steel side panels or 18-gauge galvanized reinforced laminate panels. 14-gauge galvanized bottom. All exterior side panels are reinforced with overlapping corners and are welded

in place. All insert cutouts are reinforced with 14-gauge galvanized channel supports.

Exterior top is constructed of 14-gauge stainless steel, welded, ground and polished into one integral unit. Top is fabricated with square exterior corners with fully hemmed nosing on all sides. Stainless steel fully retractable interlocks are installed on opposing corners and locks units into a complete serving system.

Interior, Refrigerated Section: Refrigerated cold pan is 10” deep one-piece constructed stainless steel tank. Louvered front and rear sides are for re-circulated forced air-cooling. The tank is separated from the top by a polycarbonate thermal break and is fully insulated with foamed in place high-density polyurethane foam. A stainless steel access panel is located in bottom of tank, allowing complete access to the evaporator coil and fan package.

On/Off switch is located on the operator side in a recessed panel with a hinged cover plate.

Refrigerated tank maintains NSF7 temperature requirements.

Interior, Heated Section: Heated pan is 10” deep one-piece constructed stainless steel tank. Louvered front and rear sides are for re-circulated forced air heating. The tank is separated from the top by a polycarbonate thermal break keeping surface temperatures below 90 degrees. Entire tank is fully insulated with foamed in place high-density polyurethane foam.

Lid: Lids are constructed of stainless steel and are foamed with polyurethane insulation. The lid thickness is 3/4”. Lid handle shall be black, recessed ABS. Lids are removable without the use of tools. Stainless steel lid locking bar is standard. Bar has locking handle at one end and mounts to clips, which are bolted to the top of the cabinet. The locking bar extends the length of the unit. Entire assembly can be removed during the serving period.

Refrigeration: Refrigeration system uses R134A refrigerant and has a self-contained 120 volt, 60 Hertz, single phase hermetically sealed condensing unit. The system utilizes and evaporator coil and fan package for re-circulated forced air- cooling of product. Unit is supplied with an expansion valve and hot gas condensate evaporator.

Heating System: Convected air type heating system with

squirrel cage blower and on/off switch. Components include high limit protection circuit, (2) 900-watt fin style heating elements and a night switch.

A stainless steel access panel is located in the bottom of the unit allowing complete access to the heating elements. The fan is accessible through the operator side of the control panel. Units meet NSF 4 temperature requirements.

Night switch is located on the operator side in the upper right corner behind a spring-hinged cover. On/off switch and adjustable range thermostat is located on the operator side in a recessed panel with a hinged cover plate.

Electrical: Electrical connections shall be 120 volt, 60 Hertz, single phase. Unit shall have a 9’ long electrical cord and NEMA 5-30 plug. Cord is standard on the operator right side of equipment. Double cord hook is located on the bottom of the unit.

Casters: Unit is mounted on 5” (12.7cm) diameter swivel polyurethane casters with non-marking tires and plate brakes. Casters are bolted directly to the 14-gauge bottom of the base. Overall height of caster assembly is 6.00” (15.2cm).

Styling: Units are standard with 18-gauge stainless steel exterior sides. Laminate is an option available at no additional charge. Decal packages and canopies are also available.

MODULE, 30”HEIGHT, 35” DEPTH

980 S. Isabella Road	Phone: 800-733-8948	Approval _________________
Mt. Pleasant, MI 48858	Fax: 800-669-0619	Date____________________
www.delfield.com	Email: info@delfield.com