Delfield®

Specification Line®

Self-Contained Solid Door Reach-In Freezer

Project ___________________________________

Item _____________________________________

Quantity _ ________________________________

CSI Section 11400

Approved _ _______________________________

Date _____________________________________

Models

One section

Two section

Three section

 

SSF1-S

SSF2-S

SSF3-S

Stainless exterior and interior full door

SSF1-SH

SSF2-SH

SSF3-SH

Stainless exterior and interior half door

SAF1-S

SAF2-S

SAF3-S

Stainless exterior and aluminum interior full door

SAF1-SH

SAF2-SH

SAF3-SH

Stainless exterior and aluminum interior half door

SMF1-S

SMF2-S

SMF3-S

Stainless front aluminum exterior and interior full door

SMF1-SH

SMF2-SH

SMF3-SH

Stainless front aluminum exterior and interior half door

SAF2-SH

Standard Features

Stainless steel interior and exterior (SS)

Stainless steel exterior, aluminum interior (SA)

Aluminum interior and exterior, stainless front (SM)

Built in door locks with heavy duty strikes

Recessed metal door handle

Pressure relief valve is standard to prevent door vapor lock

Exterior digital thermometer with high/low temperature alarm

Easy to use electronic control

• Easy access “flip up” shroud

Three wire shelves per section - SA/SS standard with chrome plated shelves and SM standard with epoxy coated shelves

Tough ABS interior door liners

10’ attached cord and plug on 115V units

6” adjustable stainless steel legs

Stainless steel breaker strips

High density foamed in place environmentally friendly, Kyoto Protocol Compliant, Non ODP (Ozone Depletion Potential), Non GWP (Global Warming Potential) polyurethane keeps energy costs low

Energy savings door heater switch

Two year parts & labor warranty

Five year compressor warranty

Options &

Accessories

Security (prison) package

6” polyurethane casters

Door field rehingability

Stainless steel interior door liner

Additional shelves

Tray slides

Stainless steel back

Laminate on front, sides and back

Bottom mount electrical

Stainless steel banking strip

Heat shield end

Stainless steel kick plate

Laminate kick plate

4” stainless steel utility base

230-50-1 electrical

220-60-1 electrical

Specification Line®: Solid Door

Specifications

Exterior: SS and SA models shall have corrosion resistant stainless steel exterior cabinet sides, front and shroud. SM models shall have corrosion resistant aluminum on exterior cabinet sides and will have stainless front and shroud. All units shall have the upper shroud hinged with a gas assist stay open feature to provide easy access to the refrigeration system.

Interior: Cabinet interior shall be corrosion resistant stainless steel (SS models) or heavy gauge aluminum (SA and SM models). Bottom and top surfaces shall be die stamped to provide radius corners and recessed floor. Three wire shelves are provided per section, SA/SS standard shelves are chrome plated, SM standard shelves are epoxy coated. Shelves rest on clips which are adjustable on 1” increments on stainless steel pilasters affixed to the cabinet interior. Pilasters are removable without tools for cleaning. Mounted to the interior ceiling, the interior incandescent light is controlled automatically through a switch mounted in the hinge assembly to protect against breakage. Door openings are protected with heavy gauge stainless steel breaker strips. An air duct shall be mounted to the ceiling assuring low velocity, even air movement throughout the cabinet interior.

Doors: Exterior shall be corrosion resistant stainless steel. Interior liner shall be resilient high impact ABS material formed to protrude beyond the door gasket to protect the gasket from tearing. Each door has two edge mount, self closing, cam lift style hinges. Doors can be removed from the cabinet without the use of tools. Metal

door handle shall be recessed into the door for easy grip without impacting aisle space. Keyed door lock is mounted in the door next to the handle. Lock engages into a heavy duty strike mounted to the cabinet face. Door gaskets are magnetic and mount to the door snapping in place and are removable without tools.

Refrigeration system: All components are mounted to the exterior of the cabinet ceiling, outside the food zone and are assembled

as one piece and can be removed as one piece. Environmentally friendly R404A refrigerant is used. The system has the capability of maintaining between -5ºF and 0ºF in heavy use food service operations. Refrigerant is metered using a highly responsive thermostatic expansion valve. System is controlled using Delfield’s ACT-Advanced Control Technology electronic temperature control, which provides improved pull down times, reduces compressor cycling and longer compressor life with lower energy consumption.

Control system uses adaptive defrost to assure evaporator coil is free of ice and is operating at optimum efficiency. Evaporator condensate is eliminated using an energy efficient hot gas system.

Electrical: Standard electrical on one and two section units shall be 115V, 60 Hz single phase. A 10’ cord and plug is supplied and attached to a junction box mounted on the exterior top of the cabinet. Three section units shall be 115/208-230 and will require hardwire connections.

Reach-In Freezer

980 S. Isabella Rd.

Mt. Pleasant, Michigan 48858

Phone: 800-733-8948 or 989-773-7981

Fax: 800-669-0619

www.delfield.com

Page 1
Image 1
Delfield SSF-S specifications Self-Contained Solid Door Reach-In Freezer, Models, Standard Features, Options Accessories

SSF-S specifications

The Delfield SSF-S is a premier commercial food storage solution designed for those in the food service industry seeking efficiency and reliability. Known for its durability and sophisticated technology, the SSF-S series caters to restaurants, catering services, and other culinary establishments that require optimal storage of perishable goods.

One of the most prominent features of the Delfield SSF-S is its spacious, user-friendly design. The unit offers generous storage capabilities, efficiently utilizing vertical space to accommodate a variety of items, from fresh produce to dairy products. The interior is designed with food safety in mind, featuring smooth, rounded corners for easy cleaning and maintenance. This helps minimize the risk of food contamination, ensuring that food items remain safe and hygienic.

The construction of the Delfield SSF-S incorporates high-quality stainless steel materials, making it resistant to corrosion and wear over time. Its robust structure not only extends the life of the unit but also aligns with industry standards for durability and performance. The stainless steel finish provides an aesthetically pleasing look, complementing most commercial kitchen environments while making it easier to clean.

Key technological features of the SSF-S include an advanced refrigeration system that ensures consistent temperature control. Equipped with a digital thermometer and energy-efficient compressor, the unit maintains optimal temperatures to keep food items fresh. This not only enhances the quality of stored goods but also contributes to reduced energy costs, supporting sustainable practices in food service operations.

In addition, the Delfield SSF-S boasts user-friendly digital controls. The intuitive interface simplifies temperature adjustments and monitoring, allowing kitchen staff to focus more on food preparation rather than equipment management. The SSF-S also includes adjustable shelving, giving users the flexibility to organize their space based on their specific needs.

Safety features are paramount in the design of the SSF-S, ensuring compliance with health regulations. The unit comes with automatic defrosting capabilities, reducing frost buildup and optimizing airflow within the storage compartment.

The Delfield SSF-S ultimately combines functionality, efficiency, and durability. Whether for a bustling restaurant or a small catering business, this unit stands out as an invaluable asset for preserving food quality and enhancing operational workflow in the modern kitchen.