Delfield®

Specification Line®

Self-Contained Solid Door Refrigerated Roll-In

Project ___________________________________

Item _____________________________________

Quantity _ ________________________________

CSI Section 11400

Approved _ _______________________________

Date _____________________________________

Specification

Models

One section

Two section

Three section

 

SSRRI1-S

SSRRI2-S

SSRRI3-S

Stainless exterior and interior full door

SARRI1-S

SARRI2-S

SARRI3-S

Stainless exterior and aluminum interior full door

SMRRI1-S

SMRRI2-S

SMRRI3-S

Stainless front aluminum exterior and interior full door

SSRRI2-S

Standard Features

Stainless steel interior and exterior (SS)

Stainless steel exterior, aluminum interior (SA)

Aluminum interior and exterior, stainless front (SM)

Built in door locks with heavy duty strikes

Recessed metal door handle

Pressure relief valve is standard to prevent door vapor lock

Exterior digital thermometer with high/low temperature alarm

Easy to use electronic control

• Easy access “flip up” shroud

Tough ABS interior door liners

10’ attached cord and plug

Stainless steel breaker strips

High density foamed in place environmentally friendly, Kyoto Protocol Compliant, Non ODP (Ozone Depletion Potential), Non GWP (Global Warming Potential) polyurethane keeps energy costs low

Energy savings door heater switch

Two year parts & labor warranty

Five year compressor warranty

Options &

Accessories

Security (prison) package

Door field rehingability

Stainless steel interior door liner

Stainless steel back

Laminate on front, sides and back

Bottom mount electrical

Stainless steel banking strip

Heat shield end

230-50-1 electrical

220-60-1 electrical

Line®: Solid Door

Specifications

Exterior: SS and SA models shall have corrosion resistant stainless steel exterior cabinet sides, front and shroud. SM models shall have corrosion resistant aluminum on exterior cabinet sides and will have stainless front and shroud. All units shall have the upper shroud hinged with a gas assist stay open feature to provide easy access to the refrigeration system.

Interior: Cabinet interior shall be corrosion resistant stainless steel (SS models) or heavy gauge aluminum (SA and SM models). Bottom and top surfaces shall be die stamped to provide radius corners and recessed floor. Mounted to the interior ceiling, the interior incandescent light is controlled automatically through a switch mounted in the hinge assembly to protect against breakage. Door openings are protected with heavy gauge stainless steel breaker strips. An air duct shall be mounted to the ceiling assuring low velocity, even air movement throughout the cabinet interior.

Each section can accommodate a 28 1/2” x 27 1/4” x 72” cart.

Doors: Exterior shall be corrosion resistant stainless steel. Interior liner shall be resilient high impact ABS material formed to protrude beyond the door gasket to protect the gasket from tearing. Each door has two edge mount, self closing, cam lift style hinges. Doors can be removed from the cabinet without the use of tools. Metal door handle shall be recessed into the door for easy grip without impacting aisle space. Keyed door lock is mounted in the door next

to the handle. Lock engages into a heavy duty strike mounted to the cabinet face. Door gaskets are magnetic and mount to the door snapping in place and are removable without tools.

Refrigeration system: All components are mounted to the exterior of the cabinet ceiling, outside the food zone and are assembled

as one piece and can be removed as one piece. Environmentally friendly R404A refrigerant is used. The system has the capability of maintaining between 27ºF and 40ºF in heavy use food service operations. Refrigerant is metered using a highly responsive thermostatic expansion valve. System is controlled using Delfield’s ACT-Advanced Control Technology electronic temperature control, which provides improved pull down times, reduces compressor cycling and longer compressor life with lower energy consumption.

Control system uses adaptive defrost to assure evaporator coil is free of ice and is operating at optimum efficiency. Evaporator condensate is eliminated using an energy efficient hot gas system.

Electrical: Standard electrical connections shall be 115V, 60 Hz single phase. A 10’ cord and plug is supplied and attached to a junction box mounted on the exterior top of the cabinet.

Refrigerated Roll-In

980 S. Isabella Rd.

Mt. Pleasant, Michigan 48858

Phone: 800-733-8948 or 989-773-7981

Fax: 800-669-0619

www.delfield.com

Page 1
Image 1
Delfield SSRRI-S specifications Self-Contained Solid Door Refrigerated Roll-In, Models, Standard Features, Specifications

SSRRI-S specifications

The Delfield SSRRI-S is a cutting-edge refrigeration solution engineered for commercial food service environments. Renowned for its reliability and performance, this unit sets a new standard in the industry, making it a favorite among restaurants, casinos, and catering services.

One of the standout features of the Delfield SSRRI-S is its advanced cooling technology. Utilizing a high-efficiency compressor, the unit delivers consistent temperatures while minimizing energy consumption. This not only helps reduce operating costs but also supports sustainability efforts by decreasing the carbon footprint of food service operations. The SSRRI-S is equipped with an electronic control system that provides precise temperature management, ensuring food safety and quality.

Constructed with durable materials, the SSRRI-S is designed to withstand the rigors of a busy kitchen. Its stainless-steel exterior not only offers an attractive finish but also facilitates easy cleaning, which is essential in maintaining hygiene standards in food prep areas. Inside, the unit features adjustable shelving made of sturdy materials, allowing for flexible organization of food storage.

The Delfield SSRRI-S is engineered with user-friendly features that enhance operational efficiency. The ergonomic design of the doors includes a self-closing mechanism, ensuring that the unit remains energy-efficient while providing easy access to contents. The door handles are thoughtfully designed for easy grip, enabling quick access even for busy kitchen staff.

In terms of performance, the SSRRI-S boasts an impressive cooling capacity. It can maintain refrigerant temperatures as low as 33°F, making it ideal for keeping perishable ingredients fresh. The unit also supports a range of operational requirements with its adjustable temperature settings, catering to the diverse needs of various cuisines and food products.

Another notable characteristic of the SSRRI-S is its quiet operation. This feature is particularly beneficial in environments where noise levels need to be kept to a minimum, allowing staff to focus on food preparation without distractions.

Overall, the Delfield SSRRI-S represents a perfect blend of innovation, reliability, and user-focused design. Its powerful cooling capabilities, efficient energy use, and durable construction make it an indispensable asset in any commercial kitchen. When investing in a refrigeration solution, the Delfield SSRRI-S stands out as an excellent choice for delivering optimal performance and meeting the demanding needs of the food service industry.