Versa Drawer™ Refrigeration Units

INSTALLATION

ELECTRICAL CONNECTION

Never stand on the unit or its drawers! Doing so may result in bodily injury.

LOCATION

Units represented in this manual are intended for indoor use only. Be sure the location chosen has a floor strong enough to support the total weight of the cabinet and contents, which can be up to 1,200 pounds. Reinforce the floor as necessary to provide for maximum loading.

The location should be selected so that power cords can be connected without any extension cords.

For the most efficient operation, be sure to provide good air circulation inside and out. Avoid hot corners and locations near stoves and ovens.

Direct exposure to excessive amouns of steam in machine compartment will result in board failure.

INSIDE CABINET

Do not pack drawer so full that air cannot circulate. Load product level with top of pans and keep all food covered.

OUTSIDE CABINET

The front louvers must be kept 24" clear of any obstructions. Proper operation of these models is dependent on air being able to flow freely through the front louvers. Side louvers must have 24" of clearance for service access.

Any restriction of the proper airflow outlined above, total or partial, will void the warranty on the unit.

LEVELING

The unit must be level so the drain pan will drain properly, drawers will line up with frames and the cabinet will not be subject to undue strain.

STABILIZING

All models are supplied with legs or casters installed for your convenience, for ease of cleaning underneath. The unit must be installed in a stable condition.

PLUMBING

All models are standard with a condensate evaporator pan.

ELECTRICAL CONNECTIONS AND GROUNDING CONNECTIONS MUST COMPLY WITH THE APPLICABLE PORTIONS OF THE NATIONAL ELECTRICAL CODE AND/OR OTHER LOCAL ELECTRICAL CODES.

UNITS EQUIPPED WITH A FLEXIBLE ELECTRIC SUPPLY CORD ARE PROVIDED WITH A THREE-PRONG GROUNDING PLUG. THIS PLUG MUST BE CONNECTED INTO A PROPERLY GROUNDED THREE-PRONG RECEPTACLE. IF THE RECEPTACLE IS NOT THE PROPER GROUNDING TYPE, CONTACT AN ELECTRICIAN. DO NOT REMOVE THE GROUNDING PRONG FROM THIS PLUG.

A 7' (2.1 m) long grounded supply cord with three- pronged plug is provided with the standard units. Simply plug into a three-pronged wall outlet for proper grounding of the unit to begin operation.

Refer to the amperage data listed in the specifications, the serial number tag, your local code or the National Electrical Code to be sure the unit is connected to the proper power source. A protected circuit of the correct voltage and amperage must be installed for connection of the line cord or permanent connection to the unit.

Have the wall outlet checked by a qualified electrician to be sure a proper ground is present and that the outlet provides the correct voltage and required amperage to match the specifications. Do not use an adapter to connect to a two-pronged outlet. The three- pronged-outlet provides a ground connection that must be used to prevent a shock hazard.

Any power cord that is frayed or damaged should be replaced. When disconnecting the unit from the power source, do not pull on the cord. Firmly grip the plug and remove from outlet.

The unit must be disconnected from the power source whenever performing service, maintenance functions or cleaning the refrigerated area.

Delfield · 980 S. Isabella Road, Mt. Pleasant, MI 48858 · (989) 773-7981 or (800) 733-8829 · Fax (989) 773-3210



Page 4 Page 6
Page 5
Image 5
Delfield Versa Drawer operation manual Installation
Page 4 Page 6

Versa Drawer specifications

The Delfield Versa Drawer is a state-of-the-art refrigeration solution designed to enhance food storage efficiency and accessibility in commercial kitchens. As part of Delfield's commitment to quality and innovation, this product combines advanced technology with practical features, making it an essential asset for any food service operation.

One of the main features of the Delfield Versa Drawer is its innovative design, which allows for easy access to ingredients while maximizing space. The unit is designed to fit seamlessly under counters, blending into the kitchen layout without consuming excess floor space. This enables chefs and kitchen staff to quickly retrieve items while maintaining workflow efficiency.

The Versa Drawer is equipped with high-performance refrigeration technology, ensuring uniform temperature control and energy savings. It utilizes a balanced refrigeration system that keeps food at optimal temperatures, reducing the risk of spoilage. The advanced airflow design aids in even temperature distribution, ensuring that all ingredients are adequately chilled.

Another notable characteristic of the Delfield Versa Drawer is its heavy-duty construction. Built with durable stainless steel, the unit is designed to withstand the rigors of a busy kitchen environment. The drawers feature easy-glide mechanisms, making it effortless to open and close even when fully loaded. Additionally, the drawers are designed to hold a variety of food storage containers, accommodating different items based on your needs.

Moreover, the Versa Drawer is energy efficient, helping to reduce utility costs without compromising performance. It is designed to comply with energy standards, making it not only a cost-effective choice but also an environmentally friendly one.

For ease of use and maintenance, the Delfield Versa Drawer has a simple digital thermostat that allows for precise temperature adjustments. This feature is complemented by an easy-access cleaning system, ensuring that the unit can be maintained with minimal effort.

In summary, the Delfield Versa Drawer stands out in the realm of commercial refrigeration solutions. With its combination of innovative design, energy-efficient technology, and durable construction, it represents an ideal choice for those looking to enhance their kitchen operations. Whether you're running a restaurant, catering business, or any food service establishment, the Versa Drawer provides the ideal balance of practicality and performance.
Top Page Image Contents