DSQ-D SERIES - DIRECT DRIVE SQUARE INLINE BLOWERS
OPERATION INSTRUCTIONS AND PARTS MANUAL
MODELS: DSQ-D-10, DSQ-D-12, DSQ-D-13, DSQ-D-15
General Safety
Rotating parts on fans should not be exposed. Where these components are not protected by ductwork, cabinets or covers, appropriate guards should be employed to restrict exposure to rotating parts. Access doors should not be opened with the fan operating to avoid foreign objects being drawn into the system. On initial
Read installation and operation instructions carefully before attempting to install, operate or service Delhi
Model | Motor |
| Weight (lbs.) |
1/4 HP 120V | 60 Hz | 55 | |
1/2 HP 120V | 60 Hz | 77 | |
3/4 HP 120V | 60 Hz | 86 | |
115 |
Suspension Mount | Customer supplied | |
Install 4 supplied angle iron mounting | suspension rods (4) | |
brackets on | upper cabinet front & |
|
| ||
rear or sides | (illustrated) |
|
Fig. 1
Base Mount
4 angle iron mounting brackets are supplied on the cabinet bottom (illustrated).
General
Inspect unit for damage, report any shipping damage to carrier. Check all fasteners,
Installation (Fig. 1)
The 4 angle brackets provided allow for base or suspension mounting.
Suspension Mounting
For suspension mounting, move the 4 angle iron mounting brackets to the four upper corners (front & rear or both sides) using the hardware provided, secure the unit to 4 customer provided suspension rods.
Base Mounting
For base mounting, 4 angle iron mounting brackets are supplied in the four lower corners (front & rear or both sides) secure these to the customer supplied base.
Vibration isolation (not included).
Recommended (spring or rubber) for both suspension or base mount.