Dell 0TF663A00 manual Connect one AC pass-through power cord to hub and

5	Connect one AC pass-through power cord to hub and
	Host PC. Connect other AC pass-through power cord

to hub and monitor.

NOTE: Do not connect AC pass-through connectors to other devices without checking the Product Information Guide

6 Connect USB cable to hub and Host PC

7	Connect peripheral 2 cables to peripherals and then
	hub when hot-plugging. NOTE: This order must be

observed or damage may result to peripherals and/or hub

8	Turn power switch on. Ensure green "Status" LED
	is illuminated

(Windows XP)

(Windows 2000)

9	Allow Windows to install drivers for devices. Ensure
	green "Host" and green "Port" LEDs are illuminated.

Amber "Port" LEDs indicate over-current

(b)

(a)

10 If Integrator is used, slide Integrator tray in (a) and replace cover (b)

Information in this document is subject to change without notice.	2 - Cables not included. Peripherals sold separately.
© 2006 Dell Inc. All rights reserved.

Reproduction in any manner whatsoever without the written permission of Dell is strictly forbidden.

Dell and the DELL logo are trademarks of Dell Inc. Dell disclaims proprietary interest in the marks and names of others.

February 2006

Waste Electrical and Electronic Equipment (WEEE) Directive

In the European Union, this label indicates that this product should not be disposed of with household waste. It should be deposited at an appropriate facility to enable recovery and recycling.

For information on how to recycle this product responsibly in your	Printed in China
country, please visit: www.euro.dell.com/recycling.