Back to Contents Page

I/O Board

Dell™Vostro™1088ServiceManual

Removing the I/O Board

1. Follow the procedures in Before Working Inside Your Computer.
2. Remove the battery from the computer.
3. Remove the access panel from the computer.
4. Remove the hard drive from the computer.
5. Remove the WLAN card from the computer.
6. Remove the control panel cover from the computer.
7. Remove the keyboard from the computer.
8. Remove the display assembly from the computer.
9. Remove the palm rest from the computer.

10. Remove the two screws that connect the I/O board to the computer chassis.
11. Disconnect the modem cable from the connector on the I/O board.
WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.