Back
Wide Mode
H Position
V Position
Sharpness
Zoom
Horizontal Pan
Vertical Pan
Pixel Clock
Phase
Audio Option
Display Info
Display Reset
Exit Menu
MENU
SETTINGS
Push 
to select Back to go back to the main menu.
Adjust the image ratio as 1:1, aspect or full screen.
NOTE: Wide Mode adjustment is not required at optimal preset resolution 1600 x 1200.
When making changes to either the 'Horizontal' or 'Vertical' settings, no changes will occur to the size of the viewing area: will simply be shifted in response to your selection/change.
Use the 
and 
buttons to adjust image to left/right and up/down. Minimum is '0'
This feature can make the image look sharper or softer. Use 
or 
to adjust the sharpness from '0' to '100' .
Use the Zoom function to zoom in to specific area of interest.
Using the
and 
keys to zoom in and out.
When using the zoom function.
Use the 
and 
buttons to adjust image to left/right and up/down. Minimum is '0'
The Phase and Pixel Clock adjustments allow you to adjust your monitor to your preference. These settings are accessed main OSD menu, by selecting 'Image Settings'.
Use the 
and 
buttons to adjust for best image quality.
If satisfactory results are not obtained using the Phase adjustment, use the Pixel Clock (coarse) adjustment and then use (fine), again.
NOTE: Pixel Clock and Phase Adjustments are only available for "VGA" input.
To turn on or off Audio Power during Power Save mode.
All the settings related to this monitor.
Reset the image to the original factory setting.
Push 
to exit the OSD main menu.
