Installing the Camera
1.Connect the camera cable to the connector on the camera module.
2.Align the camera module in its position on the computer.
3.Install:
a.display bezel
b.battery
c.base cover
4.Follow the procedures in After Working Inside Your computer.
Removing the System Board
1.Follow the procedures in Before Working Inside Your Computer.
2.Remove:
a.base cover
b.battery
c.hard drive
d.WLAN card
e.system fan
f.keyboard
g.base frame
h.heatsink
3.Perform the following steps as shown in the illustration:
a.Lift the locking tab [1].
b.Disconnect the LED and touchpad cables [2].
4.Perform the following steps as shown in the illustration:
a.Disconnect the speaker cable [1].
b.Disconnect the power connector [2].
36
