1 
memory module connectors (4)
2 | securing clip (2) |
|
|
5. Align the notch on the bottom of the module with the crossbar in the connector.
1
4
cutouts (2) | 2 | memory module | 3 | notch |
crossbar |
|
|
|
|
|
|
|
|
|
NOTICE: To avoid damage to the memory module, press the module straight down into the connector while you apply equal force to each end of the module.
6.Insert the module into the connector until the module snaps into position.
If you insert the module correctly, the securing clips snap into the cutouts at each end of the module.
1 | memory module | 2 | securing clip (2) |
|
|
|
|
7. Replace the computer cover (see Replacing the Computer Cover).
NOTICE: To connect a network cable, first plug the cable into the network wall jack and then plug it into the computer.
8.Connect your computer and devices to electrical outlets, and then turn them on.
9.
