3 - 27
Chapter 3 Removal and Replacement Procedures (RRPs)
RRP1.7 RIGHT SIDE COVER (PL1.1.20)
[Removal]
1) Remove TOP COVER FRAME. (RRP1.1)
2) Remove a screw (silver, with flange, 8mm) that fixes RIGHT SIDE COVER.
3) Release a hook at the front side that fix RIGHT SIDE COVER.
4) Remove RIGHT SIDE COVER from the printer.
[Replacement]
1) Fit the projection located on the lower part of RIGHT SIDE COVER in the groove on the
printer.
2) Fix a hook located on the front side of RIGHT SIDE COVER to the printer.
3) Attach RIGHT SIDE COVER using a screw (silver, with flange, 8mm).
4) Attach TOP COVER FRAME. (RRP1.1)