Back to Contents Page
Display

Dell™Inspiron™1100,5100,and5150ServiceManual

Display Assembly
Display Bezel
Display Panel
Display Latch Assembly

Display Assembly

1. Follow the instructions in "Preparing to Work Inside the Computer."
2. Remove the hard drive.
3. Remove the CD or DVD drive.
4. Remove the keyboard.
5. Close the display.
6. From the back of the computer, remove the two M2.5 x 5-mm screws labeled "circle D."
7. Open the display assembly approximately 180 degrees, and support the display assembly so that it does not open past this position.
8. Remove the two M2.5 x 5-mm screws from each hinge bracket.
CAUTION: Before performing the following procedures, read the safety instructions in your Owner's Manual.
CAUTION: To prevent static damage to components inside your computer, discharge static electricity from your body before you touch any of
your computer's electronic components. You can do so by touching an unpainted metal surface.
1
display assembly