Option | Description | |
|
| |
| • Enabled w/PXE: This option is enabled by default. | |
Parallel Port | Allows you to configure the parallel port on the docking station. The | |
| options are: | |
| • | Disabled |
| • AT: This option is enabled by default. | |
| • | PS2 |
| • | ECP |
Serial Port | Allows you to configure the integrated serial port. The options are: | |
| • | Disabled |
| • COM1: This option is enabled by default. | |
| • | COM2 |
| • | COM3 |
| • | COM4 |
SATA Operation | Allows you to configure the internal SATA | |
| options are: | |
| • | Disabled |
| • | AHCI |
| • RAID On: This option is enabled by default. | |
Drives | Allows you to configure the SATA drives on board. All drives are enabled | |
| by default. The options are: | |
| • |
|
| • |
|
| • |
|
| • |
|
SMART Reporting | This field controls whether hard drive errors for integrated drives are | |
| reported during system startup. This technology is part of the SMART | |
| (Self Monitoring Analysis and Reporting Technology) specification. This | |
| option is disabled by default. | |
| • | Enable SMART Reporting |
USB Configuration | This field configures the integrated USB controller. If Boot Support is | |
| enabled, the system is allowed to boot any type of USB Mass Storage | |
| Devices (HDD, memory key, floppy). | |
| If USB port is enabled, device attached to this port is enabled and | |
| available for OS. | |
| If USB port is disabled, the OS cannot see any device attached to this | |
| port. | |
| • | Enable Boot Support |
| • Enable External USB Port | |
| • | Enable USB3.0 Controller |
43
