Installing the Memory
1. Insert the memory module into the memory socket.
2. Press down on the memory module until the securing clips secure the memory in place.
NOTE: Tilting of DIMM during insertion can cause damage to the DIMM.
3. Install:
a. memory shroud
b. optical drive
c. computer cover
4. Follow the procedures in After Working Inside Your Computer.
Removing the Coin-Cell Battery
1. Follow the procedures in Before Working Inside Your Computer.
2. Remove:
a. computer cover
b. optical drive
c. memory shroud
3. Press the release latch away from the battery to allow the battery to pop-up from the socket. Lift the
coin-cell battery out of the computer.
Installing the Coin-Cell Battery
1. Place the coin-cell battery into the slot on the system board.
2. Press the coin-cell battery downward until the release latch springs back into place and secures it.
3. Install:
a. memory shroud
b. optical drive
c. computer cover
4. Follow the procedures in After Working Inside Your Computer.
Removing the PCI Card
1. Follow the procedures in Before Working Inside Your Computer.
2. Remove the computer cover.
3. Open the plastic latch fastening the PCI card in its slot.
27