Click Apply Changes, April | Dell 6200 guide

10. Click Apply Changes.

MSTP INTEROPERABILITY OF THE DELL™ POWERCONNECT™ 6200 SERIES SWITCHES WITH CISCO IOS AND CISCO CATOS-BASED SWITCHES

7.Select VLAN 20 from the Show VLAN menu and add port 1 as a tagged interface.

8.Repeat steps 4-7 to configure Port 2 as a Trunk port with VLAN members 10 and 20.

9.From the Switching > Spanning Tree > Global Settings page, enable MSTP and select Multiple STP from the STP Operation Mode menu.

10. Click Apply Changes.

APRIL 2008

14

Image 14

Dell 6200 manual Click Apply Changes, April

Contents

WITH CISCO IOS OR CISCO CATOS BASED SWITCHES Information in this document is subject to change without noticeMSTP INTEROPERABILITY OF THE DELL POWERCONNECT 6200 SERIES SWITCHES CLI CONFIGURATION CONTENTSVOICE VLAN CONFIGURATION WEB CONFIGURATION DELL POWERCONNECT 62XX MSTP FUNCTIONAL DESCRIPTION APRIL MSTP Port State Admin Port StateSTP Port State Active Topology Figure 3 Example Resultant VID to MSTI Allocation ACTIVE TOPOLOGY ENFORCEMENTFigure 2 Example FID to MSTI Allocation show spanning-tree MSTP CLI COMMANDSCONTROL PACKET BEHAVIOR Figure 5 Single STP Topology OPERATION IN THE NETWORKFigure 4 Small Bridged Network Figure 6 Logical MSTP Environment Command SAMPLE SETUP AND CONFIGURATIONSCONFIGURING BRIDGE BrA CLI Description CONFIGURING BRIDGE BrA WEB INTERFACE APRIL APRIL APRIL 10. Click Apply Changes 12. Click Show All to access the MSTP Settings Table CONFIGURING BRIDGE BrB CONFIGURING BRIDGE BrC CONFIGURING EDGE DEVICES show spanning-tree mst configuration Bridge BrC Cisco Bridge BrA DellBridge BrB Dell ADDITIONAL MSTP STATUS INFORMATION Priority APRIL Bridge BrA Dell APRIL ADDITIONAL INFORMATION AND SCALABILITY WITH MORE REGIONS Figure 7 Multiple MSTP Regions Figure 8 Multiple MSTP Region Interactions