green LED amber LED
PCI hot-plug switch
" !
To remove an expansion card, perform the following steps.
NOTE: To facilitate the removal of some of the smaller PCI expansion cards (such as the Intel EtherExpress PRO/100+ NIC), card extractors are available for purchase from other suppliers.
1.Open the panel doors on top of the computer.
See “Accessing the Interior of Your System” in Chapter 7.
"*,
2.Remove power from the expansion slot by using one of the following methods:
If your computer uses the NetWare 5.0 operating system, run ncmcon.nlm to place the affected slot in the off state.
NOTE: If all slots are reported with No in the Hot Plug column, press the <Esc> key to exit the ncmcon utility and ensure that dellsbd.nlm is loaded; then restart the utility by running the load ncmcon.nlm command.
support.dell.com | Installing System Board Options |
