12-6 SAN Installation and Troubleshooting Guide
To uninstall the Data Managed Node for NetWare, perform the following steps:
1. From the NetWare server console, stop the agent by using the unload omagent
command.
2. From a DOS prompt on the client system, type the following commands and
press <Enter>.
GULYH%% (where drive is the remote drive corresponding to the
sys volume on the NetWare server)
This step removes the om directory and all its contents. It does not remove the
Dell directory.
3. Remove the entries from the Autoexec.ncf file that are loading the agent pro-
gram. To remove the entries, perform the following steps:
a. At the system console, type /&.
b. Locate and remove the following line:
$%%%"&$%%"%"&"
c. Press <Esc> to save the changes and exit.
%"$ )*(Dell OpenManage Application Transparent Failover (ATF) is a software product that
works with Dell PowerVault 650F and 651F disk processor enclosure (DPE) storage
systems to let applications continue running after the failure of an SP, HBA, or cable.
Without human intervention, ATF can route input/output (I/O) through a secondary
path to the disk units the applications need.
���
To install Dell OpenManage ATF for NetWare, perform the following steps:
1. Create a SCSISAN High Availability Driver for NetWare diskette.
2. Install the SCSISAN High Availability Driver.
3. Install the High Availability Device Manager (HADM) Utility.
NOTE: The drivers for the Novell NetWare operating system are located on the Dell
PowerVault Fibre Channel Utilities CD. Before installation you must create a diskette
with the files needed to install ATF for Netware.