Dell 7000 Replacing the Display Assembly

Replacing the Display
Assembly
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before Working Inside Your Computer. After working inside your
computer, follow the instructions in After Working Inside Your
Computer. For more safety best practices, see the Regulatory
Compliance home page at dell.com/regulatory_compliance.
Procedure
1 Place the palm-rest assembly on the edge of a table with the keyboard
facing down.
2 Align the screw holes on the hinges of the display assembly with the
screw holes on the palm-rest assembly.
3 Replace the screws that secure the display assembly to the palm-rest
assembly.
4 Close the display.
5 Route the display cable and connect it to the system board
6 Route the antenna cables and connect them to the wireless card.
Post-requisites
1 Replace the battery.
2 Replace the base cover.
52