Dell 800F, 828FI +

Dell® 800F Series, 828FI Monitor User’s Guide 1-5

Your computer monitor allows you to easily adjust the characteristics of the image being

displayed. All of these adjustments are made using the control buttons on the front of the

monitor. While you use these buttons to adjust the controls, an on-screen menu shows

you their numeric values as they change.

1. The MENU / EXIT button opens and closes the on-screen menu.

2. The−

−−

−/+ buttons allow you to select and adjust items in the menu. When the

menu is not displayed, these buttons directly adjust the brightness and

contrast.

3. The button activates the function highlighted on the on-screen menu.

WARNING: Holding in this button for longer than 5 seconds erases all data in

the User Settings memory.

Whenever you open the on-screen menu and allow an adjustment window to remain

on-screen for about three seconds without pressing another button, this monitor automati-

cally saves any adjustments you have made. These changes are saved into a user area in

the monitor. User areas are reserved according to the signal frequency from your com-

puter. This monitor can save adjustments for up to eight user modes. It has eight factory

preset or preload modes, one for each signal frequency as listed in the “Preset Timing

Modes” on page 13.

If you have made no adjustments the on-screen menu disappears and the monitor does

not save anything.

To exit without saving the changes you have made, press the MENU / EXIT button before

the three seconds elapse.

– +

EXIT

E828fiW.book Page 5 Thursday, July 2, 1998 7:51 PM