DELL™ OPTIPLEX™ 9010 TECHNICAL GUIDEBOOK VER 1.2
1 For hard drives, GB means 1 billion bytes; actual capacity varies with preloaded material and operating environment and will be less.
2 Discs burned with this drive may not be compatible with some existing drives and players; using DVD+R media provides maximum compatibility.
3 DVD-ROM drives may have write-capable hardware that has been disabled via firmware modifications.
4 Dell 19 in 1 Media Card Reader (MCR) is supported via a F5 to F3 bay converter on the MT and DT and requires a slim line optical drive.
SYSTEM BOARD CONNECTORS
NOTE: See Detailed Engineering Specifications for maximum card dimensions.
MT DT SFF USFF
PCI Slot(s) 1 1 1
PCIe x16 Slot(s) 2 1 1 1
PCIe x16 (wired x4)Slot(s) 3 1 1 1
PCIe x1 Slot(s) 3 1 1
Serial ATA (SATA) 4 4 3 3 2
miniPCIe connector(s) 3 1
MT DT SFF USFF
RAID 0 Performance: (includes two matching capacity/speed hard drives)
1TB1 SATA 7200 RPM HDD (3.5”) X
500GB1 SATA 7200 RPM HDD (3.5”) X
250GB1 SATA 7200 RPM HDD (3.5”) X
500GB1 SATA 7200 RPM HDD (2.5”) X X X
320GB1 SATA 7200 RPM HDD (2.5”) X X X
500GB1 SATA 7200 RPM Hybrid HDD (2.5”) X X X
Optical Drive: (SFF/USFF require slim-line optical drive)
Blu-ray Writer SATA X X X X
DVD+/-RW2 SATA X X X X
DVD-ROM3 SATA X X X X
Media Card Reader:
Dell 19 in 1 Media Card Reader4 X X
1 PCI Slots (Support Standard Rev 2.3)
2 PCIe x16 Slots (Support Standard Rev 3.0)
3 PCIe x16 (wired x 4), PCIe x1 Slots, miniPCIe (Support Standard Rev 2.0)
4 Serial ATA ( 2 ports Support Standard Rev 3.0, the rest of ports Support Standard Rev 2.0)