Dell Latitude E-Family & Mobile Precision Reimage “How-To” Guide
- Microsoft XP 32 & 64-Bit, Vista 32 & 64-Bit, and Win7 32 & 64-Bit Operating Systems do not include
the Latitude ON / Precision ON driver and application
- The following table lists which products supports the Latitude ON / Precision ON feature
- In order to enable the Latitude ON / Precision ON button to hibernate Windows when switching to
Latitude ON / Precision ON modes, Dell recommends installing the appropriate software. In order to
determine the appropriate software to install, boot to the system BIOS and check the following:
1. Under BIOS settings -> system configuration
Latitude ON – ARM module is installed:
Install the "Control Point Button Service" in Windows available on Dell’s driver
& downloads support web site (support.dell.com) under the “Control Point”
section
NOTE: If you installed the Dell Control Point Connection Manager, the “Control
Point Button Service” is already installed
Latitude ON Flash / Precision ON Flash – Flash module is installed
Install the "Latitude ON Flash” in Windows available on Dell’s driver &
downloads support web site (support.dell.com) under the “Applications” section
Latitude ON Reader / Precision ON Reader
Install the "Reader 2.0" in Windows available on Dell’s driver & downloads
support web site (support.dell.com) under the “Applications” section
E4200
E4300
E5400
E5500
E6400
E6400 ATG
E6500
M2400
M4400
M6400
E6410
E6410 ATG
E6510
M4500
E4310
E5410
E5510
M6500
Latitude ON Reader X X X X X X
Latitude ON Flash X X X X X X
Latitude ON X X X
Precision ON Reader X X
Precision ON Flash X X
1st Generation
2nd Generation
Latitude
ON
Precision
ON
Solution