Auto
Adjust
INPUT SOURCE
Use this key to activate automatic setup and adjust menu. The following dialog appears on a black screen as the monit
Auto Adjustment allows the monitor to
NOTE: Auto Adjust does not occur if you press the button while there are no active video input signals or attached cab Use the INPUT SOURCE menu to select between different video signals that may be connected to your monitor.
| VGA | Select VGA input when you are using the analog (VGA) connector. Push | to select the VGA input source. |
|
| ||
|
|
|
|
|
| Select | to select the DVI input source. |
|
| ||
|
|
|
|
| Scan for Sources | Select Auto Select to scan for available input signals. |
|
|
|
|
|
| COLOR SETTINGS | Use the Color Setting menu to adjust the monitor's color settings. |
|
|
|
|
|
Input Color Format
Mode Selection
Preset Mode
Allows you to set the video input mode to:
•RGB: Select this option if your monitor is connected to a computer or DVD player using the HDMI cable or the HD
•YPbPr: Select this option if your DVD player supports only YPbPr output.
Allows you to set the display mode to:
•Graphics: Select this mode if your monitor is connected to your computer.
•Video: Select this mode if your monitor is connected to a DVD player.
NOTE: Depending upon the Display Mode you select the Preset Modes available for your monitor change.
Allows you to choose from a list of preset color modes.
In the Graphics mode, you can set the color to the following preset values:
