30 Using Your Projector
CHANGE PASSWORD—Allows you to change the password. Key in the original
password and then enter the new password. Enter the new password again to
confirm.
TEST PATTERN—Select 1 or 2 to activate the built-in Test Pattern to test the focus
and resolution. Select Off to disable the function.
1
To run the diagnostics test pattern 1, press and hold the
Menu
button and
button on the projectors control panel simultaneously for two seconds.
2
To run the diagnostics test pattern 2, press and hold the
Menu
button and
button on the projectors control panel simultaneously for two seconds.
NOTE: To enable test pattern 2, it is required to connect an input signal to
projector.
FACTORY RESET —Select On to reset the projector to its factory default settings.