Dell™ P992 Color Monitor
Quick Setup Guide
Safety Instructions
Observe the following safety guidelines when connecting and using your monitor:
•Be sure that your monitor is electrically rated to operate with the AC power available in your location.
•Locate your monitor near an easily accessible electrical outlet.
•Place the monitor on a solid surface and treat it carefully. The screen can be damaged if dropped, sharply hit, or touched with a sharp or abrasive implement.
•Put your monitor in a location with low humidity and a minimum of dust.
•Never use your monitor if the power cable has been damaged. Do not allow anything to rest on the power cable, and keep the cable away from where people could trip over it.
•Never insert anything metallic into the monitor openings. Doing so may create the danger of electric shock.
•To avoid electric shock, never touch the inside of the monitor. Only a qualified technician should open the monitor’s case.
•Be sure to hold the plug, not the cable, when disconnecting the monitor from an electrical outlet.
•Openings in the monitor cabinet are provided for ventilation. To prevent overheating, these openings should not be blocked or covered. Also, avoid using the monitor on a bed, sofa, rug, or other soft surface. Doing so may block the ventilation openings in the bottom of the cabinet. If you put the monitor in a bookcase or some other enclosed space, be sure to provide adequate ventilation.
•Do not expose the monitor to rain or use it near water. If the monitor accidentally gets wet, unplug it and contact an authorized dealer immediately. You can clean the exterior of the monitor with a damp cloth when necessary, but be sure to unplug the monitor first.
•If your monitor does not operate
Quick Specifications
AC input voltage/frequency | 100 – 240 V ~ 50 – 60 Hz |
Current | 2.0 A (RMS) at 120 VAC and 1.0 A (RMS) at 220 VAC |
Operating Temperature | 0° to 40°C (32° to 104°F) |
Dimensions | 471 mm ⋅ 451 mm ⋅ 461 mm (height ⋅ width ⋅ depth) |
| (18.54 ⋅ 17.76 ⋅ 18.15 inches) |
Weight (monitor only) | 25.5 kg (56 lbs 1 oz) |
Other accessory items in the package |
Connecting Your Monitor to a Computer
AC IN
1Turn off your computer and unplug its power cable.
2Connect the HD15 video signal cable to the video output of your computer.
3Connect the power cable for your monitor to the power port on the back of the monitor.
4 Plug the power cable of your computer and your monitor into a nearby outlet.
5 Turn on your monitor and computer. If the monitor does not display an image, refer to the troubleshooting section of this guide.
Dell P992 Color Monitor Quick Setup Guide | 1 |
