Dell PP19L owner manual 129, Screw Card carrier, Card connector Adding and Replacing Parts

NOTICE: To avoid damaging the system board, you must remove the main battery before you begin working inside the computer.

If you ordered a card with Bluetooth wireless technology with your computer, the card is already installed.

1Follow the procedures in "Before You Begin" on page 109.

2Loosen the captive screws in the modem/Mini-Card/wireless cover, and then remove the cover.

3Remove the screw securing the card carrier.

4Pull the carrier out of the compartment so that you can disconnect the card from its cable and remove the card from the computer.

5To replace the card, connect the card to the cable.

6Then carefully insert the card into the carrier and insert the carrier into the compartment.

7Replace the screw securing the card carrier into place.

1 2

4			3
1 screw	2	card carrier	3	card

4card connector

Adding and Replacing Parts

129