![Overview](/images/new-backgrounds/144652/1446525x1.webp)
Overview
This document provides important information for installing the second processor in Dell PowerEdge R520 and PowerEdge R420 systems.
Before You Begin
To install a second processor in your system, you must ensure that you have:
•Replaced the dummy fan in the FAN 6 slot with a cooling fan.
For more information on replacing the fan, see "Removing a Cooling Fan" and "Installing a Cooling Fan" in the relevant Owner’s Manual on support.dell.com.
•Upgraded the riser cards as indicated in the table below:
Table
PowerEdge |
| Upgrade | |
System |
|
| |
From | To | ||
| |||
|
|
| |
R520 | Riser1_1P: One | Riser1_2P: One | |
| |||
| Riser2_1P: | Riser2_2P: |
•One
•Two
•One
•Two
R420 | Riser1_1P: One | Riser1_2P: One |
| half length x16 link | |
| Riser2_1P: One | Same as Riser2_1P |
|
| |
|
|
|
For more information on replacing the riser cards, see "Expansion Cards and
NOTE: When selecting or upgrading your system configuration, verify the system power consumption with the Dell Energy Smart Solution Advisor at dell.com/ESSA to ensure optimum power utilization.
Additonal Processor Installation
3