4.
The Display Properties window appears.
5.Select the Settings tab.
6.Click the Change Display Type... button. The Change Display Type window appears.
7.In the Adapter Type box, click the Change...
button.
The Select Device window appears.
8.Click the Have Disk... button.
9.Verify that A:\ is displayed in the Copy Manu- facturer’s Files From: box, and then click the OK button.
10.When the Select Device window appears again, verify that the NeoMagic NMX option is high- lighted, and then click the OK button.
The Change Display Type window reappears.
11.Click the Close button.
12.Restart your computer to activate the new driver.
Windows NT 3.51
To install the video driver for the Windows NT 3.51 oper- ating system, follow these steps:
1.Save your work in all open application programs, because you will need to restart your computer at the end of this procedure to complete the installation.
2.Insert the Video Drivers Diskette 2 into the dis- kette drive.
3.
The Control Panel window appears.
4.
The Display Settings window appears.
5.Click the Change Display Type... button. The Display Type window appears.
6.In the Adapter Type box, click the Change...
button.
The Select Device window appears.
7.In the Select Device window, click the Other...
button.
The Install From Disk window appears.
8.Verify that A:\winnt351 is displayed, and then click the OK button.
The Select Device window reappears.
9.In the Models list, verify that the NeoMagic option is highlighted, and then click the Install button.
The Installing Driver window appears and asks you if you want to proceed.
10.Click the Yes button.
11.If a message appears indicating that drivers are already installed, click the New button to install the NeoMagic driver.
12.If you are prompted again for the full path to the NeoMagic files, verify that A:\winnt351 appears in the dialog box, and then click the Con- tinue button.
13.Click the OK button at the prompt, and then click the Restart Now button.
After your computer restarts, you may see an Invalid Display Settings dialog box that tells you to select the preferred video resolution. If you see this dialog box, just click the OK button and go on to the next step in this procedure.
14.If the Display Settings window does not open automatically, open it by
15.In the Display Settings window, make your desired video settings. Click the Test button and follow the instructions on your screen to verify that your settings are working properly.
After the test procedure is finished, you are prompted to restart the computer.
16.Click the Restart Now button.
