Fans: Dell Inspiron XPS and Inspiron 9100 Service Manual
Back to Contents Page
Fans Dell™ Inspiron™ XPS and Inspiron 9100 Service Manual
CAUTION: Before performing the following procedures, read the safety
instructions in your Owner's Manual.
NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist
grounding strap or by periodically touching an unpainted metal surface (such as
the back panel) on the computer.
NOTICE: To avoid damaging the system board, you must remove the main
battery before you begin working inside the computer.
The two fans are located on the bottom of the computer, one with screws labeled "F2"
(fan 2) and one with screws labeled "F3" (fan 3).
To remove fan 2:
1. Follow the instructions in "Preparing to Work Inside the Computer."
2. Turn over the computer.
3. Unscrew the two captive screws labeled "F2," lift up the fan cover, and remove it
from the computer.
NOTE: This fan cover comes off over the audio connectors.
file:///F|/Service%20Manuals/Dell/Inspiron/9100/fan.htm (1 of 4) [2/28/2004 7:45:50 AM]