10. Remove the display closure sensor from the computer.
Installing the Display Closure Sensor
1. Place the display closure sensor in the compartment.
2. Tighten the screw to secure the display closure sensor to the system board.
3. Connect the display closure sensor flex cable to the system board.
4. Replace the
palm rest
.
5. Replace the
base cover
.
6. Replace the
hard drive assembly
.
7. Replace the
keyboard
.
8. Replace the
keyboard trim
.
9. Replace the
back panel
.
10. Replace the
battery
.
11. Follow the procedures in
After Working Inside Your Computer.
70