HOW TO USE YOUR HEATER
Your product is equipped with a polarized alternating current line plug (a plug having one blade wider than the other). This plug will fit into the power outlet only one way. This is a safety feature. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the polarized plug.
1. LOCATION
Place heater on floor beneath coldest window in the room or any desired location. Your heater will minimize the effect of cold drafts.
The heater must not be located immediately below a
2. FASTENING THE FEET
Remove the feet and the fastening screws from the bag. Turn the appliance
paintwork. | A | A |
|
|
Insert the feet as shown in the figure 1, making sure they are inserted completely: the teeth A at the bottom must be coupled to the feet. Finally, fasten the feet using the two screws.
FIG. 1
3. CONNECTION
The heater must be connected to a properly polarized A/C 110/120 V household outlet in perfect working conditions.
Keep loose clothing or bedding, furniture and flammable material away from the wall outlet where the heater plug is fitted in.
4. SWITCHING ON THE APPLIANCE (FIG. 2) | foot switches | |
• Turn the thermostat knob in a clockwise | ||
|
direction until it reaches the maximum setting.
• Heating at full power: press both the foot
switches (min + med). The lights will come on.
•Heating at medium power: press only the
foot switch "med". Only the light "med" will |
|
come on. | FIG. 2 |
•Heating at minium power: press only the foot switch "min". Only the light "min" will come on.
5. SETTING THE THERMOSTAT
When the room has reached the required temperature, turn slowly the thermostat knob counter- clockwise until the lights go out but no further.
Having been set in this way, the temperature will automatically be regulated and kept at a constant level by the thermostat.
6. ANTIFREEZE FUNCTION
Set the switch to "on" and then turn the thermostat knob to " 
" setting. When it is set in this way the appliance keeps the room at a temperature of approx. 42°F (5°C) with minimal energy expenditure.
4
