Using the Reheat Botton
•Place the bread/toast into the slot.
•Press the control lever down until it locks.
•Press the “Reheat bottom” the reheat light will remain on while the reheat function in use.
•Please note that this is a fixed reheat time which cannot be adjusted by the browning control.
Using The "Warming Rack"(Only for some models)
Use this device to heat croissants.
•Fasten the rack to the toaster by first inserting the hooks A and then clicking in the hooks B, on page 2.
•Place the croissant on the rack.
•Turn the browning control dial to the desired position.
•Press down the control lever until it clicks into place.
•If the croissant is not warm enough select a higher number on the browing control dial.
Crumb Tray
The crumb tray should be emptied regularly as a build up of crumbs could be a potential fire hazard. After toasting, allow the toaster to cool down thoroughly, then slide out the crumb try and empty.
Suggestions
•Never use the toaster whitout bread inserted.
•Do not use very thin or broken slices of bread.
•Do not insert other foods that may drip during the cooking process. In addition to making the cleaning procedure more dif- ficult, these may cause fires. It is also very important to clean the crumb tray before each use.
•Do not insert (by force) foods that are too big for the slots.
•Do not insert forks or other utensils into the toaster in order to remove bread, as it may damage the resistance coils of the appliance. Remove the plug from the socket and turn the appli- ance over, gently shaking it to remove the lodged item.
Cleaning and Maintenance
•Before cleaning, switch off at the mains, remove the plug and allow to cool.
•To clean the inside, turn the toaster upside down over the sink and shake gently.
•Empty the crumb tray regulatly see crumb tray section.
•Use a soft dampened cloth to wipe the outside of the toaster and dry with a soft, dry cloth.
•Do not use metal polish or harsh scouring agents.
•DO NOT IMMERSE IN WATER.
Toaster CBT201
4
