KNOW YOUR COFFEE MAKER (continued)
UNDERSTANDING THE CONTROL PANEL: (DC50T Series Only)
1.CLOCK / TIMER DIGITAL DISPLAY: Displays the clock and timer settings. See “Setting the Clock” section of this manual for programming the time.
2.PROG BUTTON: This button allows you to program the coffee maker up to 24 hours before the desired brewing time. See the section on “Setting the Timer” for details on activating the TIMER function.
3.HOUR AND MIN BUTTONS: These buttons advance the hour and minute display for the clock and timer. See the section on “Setting the Clock”.
4.TIMER LIGHT: When illuminated, indicates that the TIMER function is being used.
5.
6.ON / OFF LIGHT: When the light is illuminated it indicates that the unit has begun the brewing cycle.
SETTING THE CLOCK
To set the correct time of day, first press the HOUR button until the desired hour is reached. Then, press the MIN button until the desired minutes are reached. Use the AM / PM indicator on the left side of the digital display when setting the time. NOTE: Unplugging the unit will reset the clock to 12:00.
SETTING THE TIMER
1.To preset your coffee maker to brew at a later time first verify that the clock is set to the correct time. (See “Setting the Clock” section of this manual for details).
2.Press and hold PROG button. While continuing to hold the PROG button, press the HOUR button until the desired brew time hour is reached. NOTE: Be sure to check the AM / PM indicator, located on the left side of the digital clock display. Then press the MIN button until the desired minutes have been reached. Release the PROG button.
3.Follow the “Operating Your Coffee Maker” steps 1 through 3. Then, press the