SETTING THE TIMER (DC55TC Series Only)
1.To preset your coffee maker to brew at a later time first verify that the clock is set to the correct time. (See “Setting the Clock” section of this manual for details).
2.Press and hold PROG button. While continuing to hold the PROG button, press the HOUR button until the desired brew time hour is reached. NOTE: Be sure to check the AM / PM indicator, located on the left side of the digital clock display. Then press the MIN button until the desired minutes have been reached. Release the PROG button.
3.Follow the “Operating Your Coffee Maker” steps 1 through 10. Then, press the
4.NOTE: If you wish to use the AROMA function, press the AROMA button immediately after TIMER light is illuminated. When the AROMA function is activated, the 
indicator will illuminate. NOTE: If the
OPERATING YOUR COFFEE MAKER
PREPARING COFFEE MAKER FOR BREWING:
1.Place the coffee maker on a flat, level surface away from any edge.
2.Plug the unit into a 120V / 60Hz only outlet.
3.The lid of the carafe must be fitted properly during the brewing process. And the carafe must be set on the warming plate.
4.The filter basket door must be properly closed
during the brewing process. CAUTION: If the filter basket door is not completely closed, the Pause ‘N Serve feature will not function properly. It could cause hot water or hot coffee to overflow.
FILLING THE WATER RESERVOIR: Figure 5
5. Open the hinged water reservoir cover located at the
top of the coffee maker. Fill the carafe with the desired amount of cold water. Empty the water from the carafe into the water reservoir.
6.Close the hinged lid. Place the carafe with the lid in place on the warming plate.
