ABNORMAL SITUATIONS AND/OR OPERATION PROBLEMS
during cooking or the self cleaning cycle.
1.30 F0 or 30 F1 appear during the cooking or self cleaning cycle
Oven temperature sensor broken or not working properly. The cooling fan stays on and if the self cleaning cycle is in progress the door remains locked.
What to do:
1.Turn the oven function selector to OFF (oven OFF). A 30 minute countdown will start. If the selector is turned and then returned to OFF the count will start again from 30.
2.Wait for the countdown to finish.
The fan switches off and the door, if locked, unlocks.
3.Disconnect the range from the mains and contact the
Caution: If the function selector is not turned to OFF (oven OFF), the cooling fan will continue to work and the oven door, if locked, remains locked.
2.F0.00 appears during the self cleaning cycle
This indicates a temperature sensor measurement error during the self cleaning cycle. This may be due to the self cleaning cycle being stopped and started again when it was quite a way through.
What to do:
1.Turn the oven selector knob to OFF (oven OFF).
2.Wait for at least 15 minutes before repeating the operations to start the self clean- ing cycle.
3.If the message is still given after several attempts call the
3.Display OFF - Oven not working properly.
What to do:
1.Turn the function selector to OFF (oven OFF)
2.Wait for the oven to cool down completely so that the door opens
3.Switch the range off for a few seconds.
If after this procedure the display is still off:
4.Disconnect the range from the mains.
5.Call the Service Centre. The range must not be used.
I | I |
I | |
I | I |
I | I |
I | I |
II | |
19
