OPERATING YOUR ELECTRIC FOOD AND CHEESE GRATER (con’t)
1)Remove dust cover (1) from end of grater before operation. (Figure 2)
2)Cut food into small squares. If you are grating cheese, remove the skin of the cheese before grating. Place cut food into the top opening of the food receiver (4) and push down. (Figure 3)
FIGURE 2 | FIGURE 3 |
3)Lower the lever (6) and press the on/off and pulse switch (7) located on the lever to grate food. Be sure to have either a plate or bowl to catch the grated food. Or you can grate directly over the food being served.
4)To terminate operation discontinue pressing the on / off and pulse switch. Wait until the stainless steel grating drum (2) has stopped rotating completely. Place your finger inside the stainless steel grating drum and rotate
5)To replace the stainless steel grating drum (2), slide it back into the opening and rotate clockwise by about a 1/4 turn. You will hear a click, indicating that the stainless steel grating drum has locked into place.
6)After use, carefully dismantle detachable parts. First, remove the stainless steel grating drum (2) according to direction number 4 in the “Operating Your Electric Food and Cheese Grater” section of your instruction manual. Second, lift the lever (6) and pull out the food receiver (4). (Figure 5)
FIGURE 4 | FIGURE 5 |
