S e l e c t i n g o p e ra t i n g m o d e s
How to dehumidify
1.Plug the appliance into the power outlet. The “POWER ON” light will illuminate.
2.Check that the “TANK ON” light is OFF.
3.Turn the humidistat control dial to the desired range or to “CONTINUOUS” for continuous operation. The Dehumidifying light will turn on.
4.In order to switch off the appliance, turn the humidistat counter clockwise to the end and unplug from the power outlet.
If you want to discharge the condensate directly into the tank, please check the pump switch is OFF. (See page 5 for details).
When the humidity in the room has reached the required level, slowly turn the humidistat knob counterclockwise until the dehumidifying light goes out. The dehumidifier will then keep the humidity in the room at the selected level automatically.
Note: When dehumidifying, the appliance not only dehumidifies but also slightly warms the air
Operating conditions
A dehumidifier will not operate satisfactory if room temperature is 65°F (18°C) or lower, or if the humidity in the room is low. Under these conditions, the dehumidifier should be turned off.
A dehumidifier will not eliminate frost on window during winter. The dehumidifying coil normally operates above freezing temperatures and cannot prevent moisture from condensing on the inside of a window pane that is below freezing.
TIP: It may be helpful to use a dehumidifier in the kitchen or laundry area where the humidity is high. Reducing humidity in these areas may reduce frost on windows in other parts of the house.
ENGLISH
7
