brush. Check that the hole underneath is not clogged and if so, clean it with a pin.
Cleaning the filter holder seat. With use, you may notices sedimenta¬tion of coffee grounds in the connection seat of the filter holder. They can be removed with a toothpick. Furthermore, periodically clean the perforated disk by letting water run over it, without putting the filter holder into its seat.
Cleaning the MAXI CAPPUCCINO device. Perform this op- eration when the
Cleaning the tank. Periodically clean the inside of the tank with a sponge or damp cloth.
Useful tips for obtaining a good italian espresso
The ground coffee in the filter holder has to be pressed lightly. Whether the coffee is stronger or weaker depends on the degree the coffee is ground, the quantity put into the filter holder and the pressing. Just a few seconds are needed for the coffee to flow down into the cups. If the dispensing time is longer, this means that the coffee is ground too fine or that the coffee put into the filter holder has been pressed too much.
To get a cup of coffee with a finer cream, use the filter (I) together with the disk (H); to get a higher cream, use instead only the filter
(I) after having removed the disk (H) from the filter holder.
Troubleshooting
A)The machine does not supply boiling water. - Make sure that there is water in the tank.
- Air has probably entered into the circuit deactivating the pump. - Repeat the operations described in the paragraph “Before use”. - If the supply is not
to an Authorised Assistance Centre.
B)The machine does not supply Steam.
-With a pin, remove any deposits which may have formed in the nozzle.
-Check that the water level in the tank is normal.
C) Coffee overflowing from the edges of the filter ring.
-Probably an excessive quantity of ground coffee has been placed in the filter ring preventing the filter ring from being correctly tightened into its housing. Repeat the operation placing the cor- rect quantity of coffee into the filter.
Coffee Maker EC160 | |
|