8
To correctly learn how to use the machine, when starting it for the first time, carefully follow the
4 PREPARING THE COFFEE MAKER
4.1 FILLING THE WATER TANK
•Remove the water tank (Fig.1), rinse it and fill it with fresh water, never exceeding the MAX line. When removing the tank, the milk frother must always be positioned towards the center of the machine, other- wise the tank cannot be removed.
•Replace the tank, pushing it all the way in.
4.2 FILLING THE CONTAINER WITH COFFEE BEANS
•Open the lid on the coffee bean container (Fig.2).
•Fill the container with coffee beans.
•Close the lid.
WARNING: To avoid malfunctions, never fill with ground coffee,
4.3 USING THE COFFEE MAKER FOR THE FIRST TIME
1.Check that the water tank is full and the power cable is plugged into the power outlet.
2.Move the milk frother towards the outside and place a cup underneath (Fig.3). Then turn the machine on by pressing the 
button (Fig.4).
3.IMMEDIATELY AFTER, WITHIN A MAXIMUM OF 30 SECONDS, turn the steam knob
4.After few seconds, a little water will release from the milk frother. When the cup is 1/3 full, turn the steam knob half a turn clockwise (Fig.6) to ter- minate the flow of water.t.
5.Wait for the 
and 
lights to stop flashing. The flashing lights indi- cate the machine is preheating. Before the lights stop flashing the machine will automatically perform a rinse cycle and a little hot water will release from the coffee spouts and collect in the drip tray. Once the lights illuminate steadily, the machine has reached the ideal temperature for making coffee.
Tip: for a hotter short coffee (less than 2 oz.); first fill the cup with the hot rins- ing water. Then leave it inside for a few seconds (before emptying it) so as to
6.At this point, the machine is ready for use.
Fig.1 |
Fig.2 |
Fig.3 |
Fig.4 |
OPERATING INSTRUCTIONS
