After ironing

To extend the working life of the iron, whenever you finish ironing, you are recommended to empty the tank as follows:

Unplug from the mains socket.

Open the cover and empty the iron, holding it point downwards and shaking it gently over a basin or sink.

To dry the remaining moisture, turn the iron on again with the thermostat dial in the maximum position for about two minutes

with the steam regulator in the

position.

Unplug from the mains socket and allow to cool.

Clean the plate with a dry cloth as traces of moisture could mark it.

Wind the power cable around the cable winder.

Store the iron in a vertical position.

Maintenance and cleaning

After use, always wait until the iron is cold before putting away.Allow to cool in a vertical position. Keep the surface of the plate clean. Do not rest or use the iron on zips, hooks, rings etc to avoid scratching the plate.

Clean the plate with a damp cloth only, never use abrasives or sol- vents.

Scale prevention system

The appliance is fitted with a permanent resin scale filter in the tank. This filters the impurities and eliminates all scale residue, thus enabling you to use normal tap water The resins reduce water hardness, doubling the working life of the iron.

5

Steam iron