ELECTRICAL CONNECTION
- BEFORE PLUGGING INTO THE MAINS, MAKE SURE THE VOLTAGE OF YOUR MAINS SUP-
PLY CORRESPONDS TO THE VALUE IN VOLTS (V) INDICATED ON THE APPLIANCE AND
THAT THE SOCKET AND POWER LINE ARE APPROPRIATE FOR THE LOAD REQUIRED.
- THIS APPLIANCE COMPLIES WITH DIRECTIVE 2004/108/EC ON ELECTROMAGNETIC
COMPATIBILITY.
INSTALLATION
The appliance must be used in the portable configuration only. The appliance is designed and pro-
duced for domestic use only.
- If the appliance is used in a room with bath or shower, respect the "safety distances" shown
in fig. 1 and always install away from taps, basins, showers, etc. The appliance must not be
placed immediately under a fixed power socket.
FUNCTIONING AND USE
MODELS WITH FUNCTION SELECTOR AND THERMOSTAT
Make sure the appliance is off before plugging into the mains.
1. Plug the appliance into the mains.
2. Turn the thermostat dial to maximum.
3. Summer mode (fan only): turn the function selector to the position (the light comes on).
4. Low power operation: turn the function selector to position 1.
5. Medium power operation: turn the function selector to position 2.
6. High power operation: turn the function selector to position 3.
7. Switching off: turn the function selector to the "0" position and the thermostat dial to
the position, then unplug from the mains socket.
NB: In models with two power levels only, position 2 corresponds to maximum power.
Setting the thermostat:
Position the thermostat on maximum. When the room has reached the required temperature,
turn the thermostat dial slowly anticlockwise until you hear a click (the fan and the light go
off). The thermostat will then keep room temperature at the selected level automatically.
Frost prevention mode
With the function selector in position 3 (position 2 for models with two power levels only) and
the thermostat dial in position , the appliance maintains room temperature at about 5°C,
preventing freezing with minimal energy consumption.
MODELS WITH THERMOSTAT ONLY
To switch the appliance on, turn the thermostat dial clockwise to maximum (the light comes
on).
To switch the appliance off completely, turn the knob to the position, then unplug from the
mains.
For the frost prevention function, turn the thermostat dial to the position and leave the ap-
pliance plugged into the mains.
MAINTENANCE
- Always unplug from the mains socket before cleaning.
- Clean the air intake and outlet grilles regularly.
- Do not use abrasive products or solvents to clean the appliance.
1
2
1
2
1
2
1
2
1
2
1
2
1
2
1
2
1
2
EN Voltage Wattage See rating plate
6
1
2
1
2
1
2
1
2